FJZ 80 stock Min ground clearance, approach/departure angles (1 Viewer)

[94landcruiser]

I was reading a comparison of the new Explorer and Commander and the artical states the offroad capabilities and gives the tc type, diff types and dimensions.

I searched here, the net, the FSM and nowhere did I find this info.


I asked on 3FE (and in two days got no response, seems they are a bit of a clique and only answer each other) I measured my truck but am not sure I measured correctly.

Anyone know or know where I might find this data?

Thanks

 

[txtortoise]

Someone with the 1994 brochure may be your best bet. Not much on Google. Probably not dramatically different than this:

2006 = Angle of approach/departure/breakover (degrees) 31/24/24
http://www.toyota.com/landcruiser/specs.html Dimensions

 

[94landcruiser]

Thanks. I googled, searched here and on other boards but did not think to look at Toyota and was not sent there by google.

Anyone have a stock 100 and 80 that can see the differances?

I looked at the new 80's here:

http://www.toyota.com.ve/showroom/vx_autana/specs.html

But these specs are not there.

 

[FJ809496TLC]

Angle of approach is 34 degrees, angle of departure is 22 degrees and the minimum ground clearance is 10.8 inches. These infos were found in the original brochure.

 

[94landcruiser]

Great! Thanks very much!