FJ60 wiper problem (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 24, 2016
Threads
7
Messages
306
Location
SW Missouri
'85 JF60 and the wipers suddenly stopped. Motor ran fine so pulled it and the linkage had come loose at the old plastic bushing. Got a new / used assembly and replaced all of it. After a few adjustments the wiper range is correct but here is my problem.

When turned off instead of stopping at the bottom the motor will continue and bring the wipers about 1/3 up the stroke. Is this just a mechanical timing or any other possibility?
 
Sounds like the small arm bolted to your motor assembly is off by a spline or two if the range of motion for the wiper arms is good. With the motor parked you'll want the arm coming off of it to be pointing almost perfectly to the left of the rig.
 
Sounds like the small arm bolted to your motor assembly is off by a spline or two if the range of motion for the wiper arms is good. With the motor parked you'll want the arm coming off of it to be pointing almost perfectly to the left of the rig.
That worked. Thanks, saved me a lot of trial and error.
 

Users who are viewing this thread

Back
Top Bottom