I’m installing an aftermarket radio in my 1981 FJ60. I am installing all new wires (vehicle came without original radio).
Where would you suggest to connect the constant power (yellow wire) and the switched power source (red wire)? Both must be connected for the stereo to power on. Thanks for your assistance!
from crutchfield:
Where would you suggest to connect the constant power (yellow wire) and the switched power source (red wire)? Both must be connected for the stereo to power on. Thanks for your assistance!
from crutchfield:
- A switched power source is only on when the ignition is keyed. Connect your new stereo's main (switched) power lead – usually a red wire – to a switched power source, so that the stereo will turn off when you turn off the car, and not drain your vehicle's battery.
- A constant power source is always on. Connect your new stereo's memory lead – usually a yellow wire – to a constant power source, so that you don't lose your radio station presets, tone control presets, and clock settings every time you turn off the vehicle.
Last edited: