fj60 rear brake dragging to where they keep geeting tighter.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 28, 2016
Threads
6
Messages
18
Location
Fulton, Mo. 65251
Ireplace the reqr shoes on my 83 fj60. new wheel cylinders,new shoes, and new soft rubber brake line. I bled the rears and test drove it and te rear brakes got tighter and tight as I drove. Do I need to bleed the front ans well? replaced the master cylinder 6 monthago and it wasnt showing these symptoms.
 
the brakes adjusting tight has nothing to do with bleeding. others in here have had the tightening happen also, but it was after new shoes n hardware on the rear axle. if i recall correct, it was something to do with a washer or c-clip thickness. yeah, i'm too lazy to look for it
 
Yes you get kind of experienced diving under the rear with two screw drivers and readjusting the handbrake automatic tensioner.

It was mentioned that the width of the C clip provided with new, and compared to the original are a bit thin and then it could shift a bit when used.
And maybe the drums are worn out (oval?) and I still have to measure them but now it is fine, so ignoring it also works out.

6 pages in this link, a world of pain by people trying to fix something and end up with smoking brakes, in the end the only thing proven is that you align the sun and the moon orbit with your inner flowing magna before you touch the brakes.

 
@hjtom

There are several threads on this. Use the search function at the top of the page. The closest some of us have gotten is that the post on aftermarket brake shoes possibly makes the adjustment mechanism wonky.

What shoes and hardware kit are you using? What drums?
 

Users who are viewing this thread

Back
Top Bottom