Wanted FJ60 Manual (33 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

55 Parts

Hey Bitfreak,

I am in Oregon as well (Medford). Check out last Thursday's Nickle...a guy is selling a "71 FJ 60 Land Cruiser" for $2700. I called him about it out of curiosity and yes, it's a 55, not a 60.

Now I can't find his friggin' number. It MIGHT be 899-5980 (he's in Applegate). But I searched the Nickel online and found a "72 Land Cruiser" for $1000. I don't know if that's the same guy but that number is 858-9563 (call after 6pm).

So..... I hope that helped!

Derek
 
Eric,
T-case looks in good shape. i will see what there is locally (so as not to incurr shipping) and get back to you. thanks
derrick
 
wtb 70 fj40 parts

looking for a
roll bar

one 79 jump seat
rear crossmember gussets
thanx
 
Last edited:
no problem - just let me know
 
I have one from an 85 fj60 I parted. Engine was frozen so I can't guarantee the pump works, but the power steering pump didn't appear to have been leaking on it and it spins fine so I think it's good.

I'd sell it for $100 plus the ride from 50312
 
Ryan and Mark,

PMs sent.

Lash
 
I've got a factory rollbar from a 74 you can have for 100 plus the ride. No rust.
 
Yup, there's the 68 and older that is setup for the small rear turn signals, the 69-73 that is setup for the large round turn signals, and the 74 and newer with the cutout for the 3 light taillights. The 79 up is also gonna be drilled differently for the different body mounts, but that's not a big deal.
 
its fo a 70 (smaller round lights)
 
wtb - Seat Belts - 3rd row 80 series

Previous owner's dogs ate through the third row seat belts. I don't plan on using them often, but would like the option. I know many of you take them out, sell them whatever. So, if any of you would like to sell the 3rd row seat belts for a reasonable price - prefereably tan - give me a shout.
 
May be able to work something out on Mace'x frame. I could go through vegas on my way to Idaho pick up the frame and drop it off when i pick up the headers. Let me know
 
WTB: OME 2.5" HEAVY LIFT

I have started to piece together my 2"OME HEAVY lift..

So far I have:
- One pair of OME N74E shocks
- Extended Brake Lines

Need:
2 x OME 850 Front Coil Springs
2 x OME 863 Rear Coil Springs
2 x N73 Shocks
1 x SD24 Steering Damper
1 x CA77B Caster Kit

Any help is appreciated! :beer:
 

Users who are viewing this thread

Back
Top Bottom