If Mike doesnt have a set, I have a set.
Wanted FJ60 Manual (48 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
found
found thanks ....
found thanks ....
Last time I was at the pick and pull there was a full box, pump and lines. I could get if you need.
I have a Downey bellhousing,clutch,flywheel,rear t-case mount,clutch fork, bolts. E-mail me @ dtedwards55@earthlink.net Trent
LOL. I have the Downey full circle as well. Wonder why nobody is using the ones they have?
I have a bottle jack. $40 including shipping. PM me,.
- Joined
- Feb 21, 2005
- Threads
- 36
- Messages
- 164
- Location
- Bellingham WA or Pleasanton CA
- Website
- outdoor.as.wwu.edu
WTB: V8 to 4 speed overdrive (fairey)
Looking for the Ranger Torque Splitter Overdrive. Let me know if you have one.
-Mike
Looking for the Ranger Torque Splitter Overdrive. Let me know if you have one.
-Mike
yoda-g3
SILVER Star
Ttt
If you have a three speed floorshift type of shifter (not the vacuum type) the only difference between the operating rod to the shift fork is the length. So, if you're desperate, it's probably possible to make a longer input rod for the three speed shift assembly out of steel stock. It needs about 2" more length to work with the four speed floor shifter.
Is it a for sure thing that the 3 speed shift mechanism won't work with 3 speed floor shifter? I doubt it. Both shift exactly the same way inside the front tail housing.
Is it a for sure thing that the 3 speed shift mechanism won't work with 3 speed floor shifter? I doubt it. Both shift exactly the same way inside the front tail housing.
There is a guy selling 5 on ebay, they appear to be fairly clean and are extremely cheap. I thought about buying them for posterity, but decided to stick with my 16" wheels. Hope this helps.
[URL=http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=7972747920&sspagename=STRK%3AMEWA%3AIT]link to auction[/URL]
[URL=http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=7972747920&sspagename=STRK%3AMEWA%3AIT]link to auction[/URL]
Note: I just noticed that he took the "Buy it Now" option down. This past weekend he was asking $125 for the set. He is willing to ship and have the tires removed from the wheels if you are not interested in them.
I think I might have you covered. I'll take a pic and post up tomorrow or later today. I have a 4 speed tcase shifter and linkage.
Tranfer case parts
I need a rear output shaft for a 76 fj40 with the high gear. I'll take whole output shaft assembly if you will not part out. My high gear has slop. I have a feeling it will just get worse and wear out new idler shaft and grenade.
Anybody.
I need a rear output shaft for a 76 fj40 with the high gear. I'll take whole output shaft assembly if you will not part out. My high gear has slop. I have a feeling it will just get worse and wear out new idler shaft and grenade.
Anybody.
I have this set off of my 77. They work fine and I only replaced them because they started to throw grease on my rims and they were looking bad. Insides are good. You can have them if you like.
Last edited:
