Wanted FJ60 Manual (10 Viewers)

[Jukelemon]

The PS would make sense. That is where the fittings exit i.e. to the left of the pump not the right. I saw one on ebay. Seems like a bit much to fabricate a bracket for a pump that does not belong on the DS. That would also require you to take the alt. to the DS to compensate for space needs.

 

[phishtaco]

WTB: 2F Alt. Brkt and Saginaw PS Pulley

The 2f brkt I bought didn't have the part that mounts to the engine, so I need a new one.
And a sag. ps pulley.

Thanks for helping.

 

[fj60dave]

Where was my brain? PS pump and bracket is located on the front DRIVER's SIDE of the block...

 

[Finn74]

I ordered those from SOR and your right, they don't flip all the way back. I might be able to work out some of the metal so it can bend farther, but that might make it structurally unsound. SOR shows the right ones, but their discontinued....dag.

 

[mike]

I have one from a 77 fj40. $40USD plus the rideEmail me for some pic's--spinpromo@sympatico.ca. Thx

 

[MiniPigg]

btt

 

[treerootCO]

what is cheap?

 

[74fj40]

Lookin for a rustless steel tub for a 40

Hello im looking for a rustless used steel tub the will fit a 74 fj40 abit of rust is ok, but nothing that is unrepairable. I am located in denver colorado

thanks

>Max

 

[cosmo]

FJ60 Gear reduction starter

I'm looking for a clean, low mileage gear reduction starter out of an '83 or newer FJ60. Thanks

 

[Durango60]

I've got 2 if you are still looking

From a 85 FJ60 with 180k, very well taken care of. I'll be swapping them out with some 4.10's hopefully next week. Let me know if you still need some.

 

[Toyo FJ40]

I know how you feel about e-bay but there's a 72 cruiser listed and it will fit your frame. Right now at $405.

Here's the link
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4536854681&category=6443

 

[Romer]

I wouldn't buy that Max. I have seen better for the same price and shipping from ark would be about $500

 

[PKP80]

Pimp

Pimp,
A chance that the swap meet would have another one? If you would look next time and nab it for me if they do I would be very appreciative.

-SAM-

 

[Vitesse_6]

Max, Why arent you going down to the fjboneyard like the others? I bet you could find something there?
Good luck

 

[zetasig]

Jim C and be done with it. (do a search)

FJ40Jim@aol.com

 

[Junkyard]

FJ40 4.11 3rd member

Need a 4.11 3rd member shipped to souther Oregon (97502).

I'm trying to help out a fellow cruiserhead...

Anybody ???

Thx!

 

[clemson55]

I've got a 4.11 third member in SC if no one comes up with one closer to you. I know shipping would be crazy though.

 

[Pytbool]

SM465 Reverse Switch

If anyone has a junked SM465, I need the reverse switch off it. I rebuilt my tranny and managed to lose mine somehow. Or it was the elves that move my tools around when I'm not looking.

Thanks
-Tyler

 

[Landpimp]

it was the local yearly 4x4 meet...........wont be anymore

John

Pimp,
A chance that the swap meet would have another one? If you would look next time and nab it for me if they do I would be very appreciative.

-SAM-

 

[uzj100]

1. I have a remote key. You will have to get a blank.
2. I have a bughood deflector - you will need some bolts.
3. Sunroof Deflector - Through this in the trash, made to much noise at 80 mph.

Also, do you still want the ARB? I still have it.

uzj100