Wanted FJ60 Manual (10 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

The PS would make sense. That is where the fittings exit i.e. to the left of the pump not the right. I saw one on ebay. Seems like a bit much to fabricate a bracket for a pump that does not belong on the DS. That would also require you to take the alt. to the DS to compensate for space needs.
 
WTB: 2F Alt. Brkt and Saginaw PS Pulley

The 2f brkt I bought didn't have the part that mounts to the engine, so I need a new one.
And a sag. ps pulley.

Thanks for helping.
 
Where was my brain? PS pump and bracket is located on the front DRIVER's SIDE of the block...
 
I ordered those from SOR and your right, they don't flip all the way back. I might be able to work out some of the metal so it can bend farther, but that might make it structurally unsound. SOR shows the right ones, but their discontinued....dag.
 
I have one from a 77 fj40. $40USD plus the rideEmail me for some pic's--spinpromo@sympatico.ca. Thx
 
Lookin for a rustless steel tub for a 40

Hello im looking for a rustless used steel tub the will fit a 74 fj40 abit of rust is ok, but nothing that is unrepairable. I am located in denver colorado

thanks

>Max
 
FJ60 Gear reduction starter

I'm looking for a clean, low mileage gear reduction starter out of an '83 or newer FJ60. Thanks
 
Last edited:
I've got 2 if you are still looking

From a 85 FJ60 with 180k, very well taken care of. I'll be swapping them out with some 4.10's hopefully next week. Let me know if you still need some.
 
I wouldn't buy that Max. I have seen better for the same price and shipping from ark would be about $500
 
Pimp

Pimp,
A chance that the swap meet would have another one? If you would look next time and nab it for me if they do I would be very appreciative.

-SAM-
 
Last edited:
FJ40 4.11 3rd member

Need a 4.11 3rd member shipped to souther Oregon (97502).

I'm trying to help out a fellow cruiserhead...

Anybody ???

Thx!
 
I've got a 4.11 third member in SC if no one comes up with one closer to you. I know shipping would be crazy though.
 
SM465 Reverse Switch

If anyone has a junked SM465, I need the reverse switch off it. I rebuilt my tranny and managed to lose mine somehow. Or it was the elves that move my tools around when I'm not looking. :)

Thanks
-Tyler
 
it was the local yearly 4x4 meet...........wont be anymore :(

John


PKP80 said:
Pimp,
A chance that the swap meet would have another one? If you would look next time and nab it for me if they do I would be very appreciative.

-SAM-
 
1. I have a remote key. You will have to get a blank.
2. I have a bughood deflector - you will need some bolts.
3. Sunroof Deflector - Through this in the trash, made to much noise at 80 mph.

Also, do you still want the ARB? I still have it.

uzj100
 

Users who are viewing this thread

Back
Top Bottom