Wanted FJ60 Manual (50 Viewers)

[blupaddler]

Wanted: Fridge/Freeze

I am looking for a ARB/Engel fridge/freeze in the 42 or so model. If maybe you have one or are moving up in the world to a bigger one and want to sell me yours


I know this may seem far fetched, but at least I am not looking for an 80 locked and loaded for $5........that's my next post


Thanks,

Robb

 

[Cruiserdrew]

Stock springs from 80

I got a set in Sacramento. They came off of my '97 at 56k miles. I also have the shocks and steering damper. Let me know if interested.

 

[Texican]

Early One Barrel Carb

Mine looks like the lower one.
Butch

 

[Cruiser_Nerd]

Early One Barrel Carb

Good to know what isn't the same
Thanks anyhow, Butch.

 

[toycrusier]

Crank shaft pulley

I need a crank shaft pulley that will fit a 1970 F motor . If you have one please e-mail me and we'll work out a deal. Thanks , Bruce in NC

 

[Rice]

Looking for windshield knob

Only need one for a 74 FJ40. Thank you.

 

[3_puppies]

Looking for windshield knob

are you looking for the knobs that screw thru the dash that hold the windshield up? I've got a pair, not perfect, PO looks like he used a set of pliers on them. $10 bucks to cover shipping and you can have them.

 

[cruiserbrett]

anyone parting out an FJ55?

I need some stuff for my FJ55...

Door panels(any year),
cargo area side panels(any year)
Any air conditioning parts(my evap went bad and now leaks!)(any year?)
the center panel on the dashpad...early-72?
Passenger front door(doesnt matter year wise, going to be on a semi beater rig)

Thanks!
-Brett
Contact me through email, since I rarely realize I have messages here... brettgarland@yahoo.com or cruiserbrett@hotmail.com

 

[fjcruiser]

Early F upper t-stat housing

I'm sure I've got what you need. I'll check tonight.
From a '72 F, that OK?

 

[Willy]

Crank shaft pulley

I have a good one if needed...contact- nnyllaff@hotmail.com

 

[Poser]

Re:Wanted: Fridge/Freeze

Appears to me that you need to pull the needle out of your arm, and come back to reality...mr fantasy boy..

Good luck!

-Steve

 

[Romer]

Re:Haynes Manual

Poser- The factory manuals don't have everything. I usually flip back and forth between them and the haynes manual before I do anything. The factory manual is better written and more user freindly. Haynes gets right into and tears it down when sometimes you still trying to figure out whats wrong. I agree the factory manuals should be the first to get and are worth the extra bucks, but the Haynes manual does add some value.

Just my 2 cents

Ken

 

[72tlcnelson]

NEEDED BAD!!FJ40 Gas pedal assembly

Just trying to finish up my rig and need a gas pedal out of a 72 fj40. I guess the pedal assemblies would be pretty much the same in all 40's , NO?
Let me know asap! Thanks!

 

[e rock]

Early F upper t-stat housing

I should have someone bringing me one tomorrow, but thanks for the offer!

Eric

 

[72tlcnelson]

NEEDED BAD!!FJ40 Gas pedal assembly

Need a gas pedal assembly quick! Anyone have one?

 

[Scottb]

FJ80 FRONT DIFF

I`AM LOOKING FOR A COMPLETE FJ80 FRONT DIFF, AND MAYBE A REAR TOO. I`M IN DENVER, CO.

 

[Scottb]

fj40 wiring harness fj55 rear spings

I HAVE A NEW CENTECH WIRING HARNESS STILL IN THE BOX FOR MY 1970 FJ40, AND A FEW EXTRA THING`S THAT CAME WITH IT. I WILL LOOK FOR THE RECEIPT ON SATURDAY AND GET BACK TO YOU. I`AM SHIPPING A ENGINE TO A GUY ON MONDAY OR TUESDAY TO THE TOWN OF, ANTIOCH, CA. WHICH IS ABOUT A HOUR FROM YOU, MAYBE YOU CAN PICK IT UP FROM HIM.

 

[awileyone]

FJ80 FRONT DIFF

Hey Scott, I emailed you.

chad

 

[Wadesters]

NEEDED BAD!!FJ40 Gas pedal assembly

I have many gas pedal assemblies. Do you need the pedal itself, or linkage??

 

[Cruise1977]

NEEDED BAD!!FJ40 Gas pedal assembly

where are you located? I have a cable pedal in Northern VA $25 + s&h.

-Josh