morganism
SunkCostFallacy
So, just got these Taiwan knock off $runner handles. They have holes cut for plastic inserts, no threads.
But they do have wings on both sides, so can be used R/L or F/R. I used a hex head bolt, and a castelated lock nut, and went together fine. Worked OK.
Was 17 bucks for the pair, so didn't mind the hack.
https://www.amazon.com/dp/B00ANQ57I6/ref=cm_cr_ryp_prd_ttl_sol_0
part #s
ADS2371L or R
TO1311108
TO1310108
1217114817
0218115324
MADE in Taiwan
But they do have wings on both sides, so can be used R/L or F/R. I used a hex head bolt, and a castelated lock nut, and went together fine. Worked OK.
Was 17 bucks for the pair, so didn't mind the hack.
https://www.amazon.com/dp/B00ANQ57I6/ref=cm_cr_ryp_prd_ttl_sol_0
part #s
ADS2371L or R
TO1311108
TO1310108
1217114817
0218115324
MADE in Taiwan
Last edited: