Wanted FJ60 AC compressor mount

[SuperDuperCruizer]

@65swb45 I'm looking for the compressor brackets to a 2F. Do you still have the 60 & 40 motor mount/compressor bracket available for sale?

 

[65swb45]

@65swb45 I'm looking for the compressor brackets to a 2F. Do you still have the 60 & 40 motor mount/compressor bracket available for sale?

Pretty sure I do. I'm out in the field early this morning doing a vehicle inspection and running parts. Leave me a VM and I'll check when I get in to the shop. Thanks!

 

[SuperDuperCruizer]

Flying out of the country today; I don't know what internet access I'll have. If you don't hear back from me. I'm returning to the US next Friday and will coordinate with you then. Thanks.

 

[girraffe]

Do you have one of these you can spare?

@3_puppies

 

[fjgdk]

Is this what you are trying to do? To my knowledge the motor mount along with the guide wheel below came from a US FJ60. Not sure where the tensioner below the alternator bracket came from? The FJ40 motor mount was recessed underneath, but the FJ60 mount was not. Local machine shop took care of that - just something to keep in mind.

View attachment 1286971

Sorry

Is this what you are trying to do? To my knowledge the motor mount along with the guide wheel below came from a US FJ60. Not sure where the tensioner below the alternator bracket came from? The FJ40 motor mount was recessed underneath, but the FJ60 mount was not. Local machine shop took care of that - just something to keep in mind.

View attachment 1286971

As a bit of a hijack, count you PLEASE take a photo of the front of the AC between the compressor and alternator so I can see how that bracket (and the rest of the alternator/ac connection area) is connected ?

I have taken apart that side of my stock 1983 FJ60 engine and didn't take pictures and can't remember how it all goes back together ? Any help would be appreciated.

 

[gcrump01]

Here's another angle from before the fenders were on. And one I took just now - hard to get a good angle - it's tight in there.

 

[65swb45]

That should do it.

 

[fjgdk]

Is this what you are trying to do? To my knowledge the motor mount along with the guide wheel below came from a US FJ60. Not sure where the tensioner below the alternator bracket came from? The FJ40 motor mount was recessed underneath, but the FJ60 mount was not. Local machine shop took care of that - just something to keep in mind.

View attachment 1286971

Sorry to hijack, but I am trying to re-assemble

Here's another angle from before the fenders were on. And one I took just now - hard to get a good angle - it's tight in there.

View attachment 1581252 View attachment 1581253

Thank you ! I’ve been trying to get this info for a week to no avail. I couldn’t seem to find the parts diagram that shows the fj60-specific compressor adjustment bracket (shown earlier in this thread) and therefore couldnt ensure I had it in there correctly. The picture helps alot.

You said it was a tight area, I know. Now I’m getting greedy and ask if you could turn the phone flash on and focus on the area circled below and take a pic. ? Agalin greedy I know so no biggie if not.

Thanks again !

 

[gcrump01]

Ok.

 

[65swb45]

Still have the bracket listed in post #5