Wanted FJ45 swb tail lights 1964

[idahofj40cruiser]

Vehicle Model

1. 45 Series

I’m looking for a set of 1964 fj45 swb tail light lenses. I will take reproductions or whatever I can get. I could also use the rear window rubber. I know it’s a long shot but I thought I’d try. I’m finally going to restore it.

 

[3_puppies]

more info needed
2 different versions of the taillights, depending on if they were in the bed or the rear crossmember
which cab version do you have? as there are different windows depending on which version you have

 

[hyhpe]

Hope this helps.

Rear Cab Window Weatherstrip for Land Cruiser FJ45

Rear cab window weatherstrip for '68 to '84 Toyota Land Cruiser FJ45 pick-up / ute. Equivalent to OEM part # 64831-90332. Installation tips

www.cityracerllc.com

 

[65swb45]

Good call Paul (hey, that rhymes!)

I can see the split window in the avatar. If it’s under bed light lenses, I think these guys were selling them at one point:

View Cart

Koromo Heritage is a one-stop retro-spares shop for all classic Toyota vehicles. Toyota Heritage retails spare parts for early model Toyota vehicles. We specialise in all Toyota models built before 1985.

www.koromoheritage.com

 

[idahofj40cruiser]

Wow, thank you so much!
I appreciate you being so helpful.
The lights are mounted in the bed and are the round ones.
I am going to restore this because the bed is starting to rust a bit. I’ve driven this for years and would like to hand it down to to my boys. They love it.

Good call Paul (hey, that rhymes!)

I can see the split window in the avatar. If it’s under bed light lenses, I think these guys were selling them at one point:

View Cart

Koromo Heritage is a one-stop retro-spares shop for all classic Toyota vehicles. Toyota Heritage retails spare parts for early model Toyota vehicles. We specialise in all Toyota models built before 1985.

www.koromoheritage.com

 

[Unimogguy]

Good call Paul (hey, that rhymes!)

I can see the split window in the avatar. If it’s under bed light lenses, I think these guys were selling them at one point:

View Cart

Koromo Heritage is a one-stop retro-spares shop for all classic Toyota vehicles. Toyota Heritage retails spare parts for early model Toyota vehicles. We specialise in all Toyota models built before 1985.

www.koromoheritage.com

@65swb45 Mark unfortunately they’ve closed up shop. I only know because I was going to contact them to see if they’d be interested in making a early 40/45 part.

@idahofj40cruiser sweet rig with nice patina! They’re only original once. I hope you keep the patina and restore the mechanical! Are you wanting to replace just the lenses or the whole taillight housing?

If just the lenses you can find them here:
FJ40 Tail Lights - Specter Off-Road - https://www.sor.com/cat/148
You might also check with other vendors who actually support this site. Marks Off-road, Valley Hybrids, Cruiser Outfitters, etc.

Last 2 pics contain the part number if you contact Toyota or one of the vendors. Pic from @pardion
I seem to remember that Toyota still sells one version (diameter) of the taillights I just don’t remember which version it was? But I could be wrong!?!?! Maybe someone will confirm.

If you want the whole housing you find it here:

For Sale - FJ45 SWB Tail Lights and/ or mounts

For sale: Reproduction tail light mounts in 1018 steel or Aluminum. Steel - $100.00 each Aluminum - $ 95.00 each Steel Mount and Tail light $175.00 each Aluminum mount & tail light $170.00 each All prices are plus shipping

forum.ih8mud.com

 

[idahofj40cruiser]

more info needed
2 different versions of the taillights, depending on if they were in the bed or the rear crossmember
which cab version do you have? as there are different windows depending on which version you have

Thank you so much for your help, my boys and I are going to restore this. My six year old is obsessed with this truck.
I have the in bed round lights and the sliding rear windows.

 

[idahofj40cruiser]

Mark unfortunately they’ve closed up shop

View attachment 3723681

View attachment 3723683

View attachment 3723684

@idahofj40cruiser sweet rig with nice patina! They’re only original once. Are you wanting to replace just the lenses or the whole taillight housing?

If just the lenses you can find them here:
FJ40 Tail Lights - Specter Off-Road - https://www.sor.com/cat/148 I seem to remember maybe Toyota still sells one version (diameter) of the taillights I just don’t remember which version it was? But I could be wrong!?!?! Maybe someone will confirm.

If you want the whole housing you find it here:

For Sale - FJ45 SWB Tail Lights and/ or mounts

For sale: Reproduction tail light mounts in 1018 steel or Aluminum. Steel - $100.00 each Aluminum - $ 95.00 each Steel Mount and Tail light $175.00 each Aluminum mount & tail light $170.00 each All prices are plus shipping

forum.ih8mud.com

I would like to keep the patina but stop the rust. I haven’t ever done that though. What do I need to do to stop the rust but keep it as is? The only rough parts are on drivers side bed and one of the cross beams underneath.

 

[idahofj40cruiser]

Mark unfortunately they’ve closed up shop

View attachment 3723681

View attachment 3723683

View attachment 3723684

@idahofj40cruiser sweet rig with nice patina! They’re only original once. Are you wanting to replace just the lenses or the whole taillight housing?

If just the lenses you can find them here:
FJ40 Tail Lights - Specter Off-Road - https://www.sor.com/cat/148
You might also check with other vendors who actually support this site.

I seem to remember that Toyota still sells one version (diameter) of the taillights I just don’t remember which version it was? But I could be wrong!?!?! Maybe someone will confirm.

If you want the whole housing you find it here:

For Sale - FJ45 SWB Tail Lights and/ or mounts

For sale: Reproduction tail light mounts in 1018 steel or Aluminum. Steel - $100.00 each Aluminum - $ 95.00 each Steel Mount and Tail light $175.00 each Aluminum mount & tail light $170.00 each All prices are plus shipping

forum.ih8mud.com

Thank you
I just pm him.

 

[idahofj40cruiser]

Hope this helps.

Rear Cab Window Weatherstrip for Land Cruiser FJ45

Rear cab window weatherstrip for '68 to '84 Toyota Land Cruiser FJ45 pick-up / ute. Equivalent to OEM part # 64831-90332. Installation tips

www.cityracerllc.com

Thank you
I appreciate you all so much!
This community is just fantastic!

 

[Unimogguy]

I edited and added some more info/pics to the post above.

As far as patina…Preserving Patina - How To Tips and Tricks - https://forum.ih8mud.com/threads/preserving-patina-how-to-tips-and-tricks.1097611/

Ospho also works great on areas that aren’t visible. I’ve been using it for years on trucks with good results.

 

[idahofj40cruiser]

I edited and added some more info/pics to the post above.

As far as patina…Preserving Patina - How To Tips and Tricks - https://forum.ih8mud.com/threads/preserving-patina-how-to-tips-and-tricks.1097611/

Ospho also works great on areas that aren’t visible. I’ve been using it for years on trucks with good results.

Wow, I owe you big time man!
If you are ever out this way I’ll share some fishing holes and hunting spots.

 

[65swb45]

If I were you, I would buy the whole assemblies while they’re still available. The bulb sockets can’t be in great shape after 60 years, and you will realize this once you take the lenses off…and watch the lens gaskets crumble to bits.

 

[Unimogguy]

Wow, I owe you big time man!
If you are ever out this way I’ll share some fishing holes and hunting spots.

Just trying to repay the knowledge, parts, etc that have been shared with me. But if you really want to make a bunch of guys happy start a restoration thread in the 45 section. We enjoy being able to follow along!

 

[idahofj40cruiser]

If I were you, I would buy the whole assemblies while they’re still available. The bulb sockets can’t be in great shape after 60 years, and you will realize this once you take the lenses off…and watch the lens gaskets crumble to bits.

Do you have any available for purchase by chance? I’ll probably order them from SOR today

 

[hyhpe]

I think you can buy the light fixtures from any dealership. I'm not affiliated with them. just an example.

81550-60011 - Lamp Assembly Rear Combin Ourisman Toyota Parts

Save Money On Your Lamp Assembly Rear Combin (8155060011) For Your

toyotaparts.ourismantoyotaofrichmond.com

 

[3_puppies]

the split window rubber was reproduced1-2 years ago
I remember seeing the thread in the 45 sub section

I think this is it:

For Sale - SWB Fixed Cab Rear Split Window Rubber Extrusion Group Buy

I’m told the OEM Rubber Extrusion is being manufactured. There seems to be no need for further remedies. thanks to all of you for considering any/all possibilities. p.s. I have nothing to do with the reproduction process that is underway

forum.ih8mud.com

 

[65swb45]

Do you have any available for purchase by chance? I’ll probably order them from SOR today

Yes I do. I am out running errands at the moment. I should be back in the shop within the hour.

 

[middlecalf]

Sweet rig. Pics of interior and engine bay?

Here’s where to get the rear window gaskets for your SWB FT rig. You still have yours, are they in bad shape?

Rear Cab Split Window Weatherstrip for Early Land Cruiser FJ45 - LH and RH

Rear cab split sliding window weatherstrips for early Toyota Land Cruiser FJ45 pick-up / ute. Price includes both the LH and RH pieces.

www.cityracerllc.com

 

[cruiseroutfit]

We offer the pre-built early tail lights. These include the 2 filament bulb setup.