FJ45 2H swap: which motor/gearbox mounts?

[Greek Cruiserhead]

Rebuild 74 FJ40 RHD from Down Under - 2F to 2H to 12HT - 40 series Axles with 80 series Coils

These are mounted on the engine in the centre set of the bolt pattern on the above engines blocks, again the face angle to the block is wrong for the FJ.

forum.ih8mud.com

There's a photo of your above bracket installed on a 2F, fj40. Go ahead and grab from the seller.

Ordered them, parcel is on the way, thank you Nate!

 

[Greek Cruiserhead]

Moreover, the seller, a very nice person, found this P/S Pump BRACKET (1st & 2nd pic).
It seems to be the right one for the 40-Series swap that @duncanrm mentioned earlier (3rd pic) . Is it correct?

 

[mattressking]

It's broken and bent along the adjuster so I'd be hesitant on buying....otherwise have someone weld it up and smooth out. Those castings aren't exactly the easiest to save.

 

[Greek Cruiserhead]

It's broken and bent along the adjuster so I'd be hesitant on buying....otherwise have someone weld it up and smooth out. Those castings aren't exactly the easiest to save.

It is broken, indeed. However, I expect that my mechanic (or my blacksmith) can fix it.
Can one say that it is the correct part?

 

[mattressking]

Copy - if you’re looking for the unit on right, then yes it is correct.

 

[Greek Cruiserhead]

Copy - if you’re looking for the unit on right, then yes it is correct.

Ordered, thank you Nate!