Hello,
77 FJ40 USA model. I've been putting interior back together and wiring. Was putting the radio in last night. From retrosound. It has a plate on the front that causes the knee pad pieces to be about 1/8" off the metal dash for a very short segment. (see pic how the black plate goes under the driver side knee pad for just a bit. this is before I restored the body tub. I'm working with fresh paint now. Anyway, i don't recall if there are clips that hold the knee pads on or if I need to use adhesive to keep things as flush as possible. Advice / experience with this is appreciated as always!
77 FJ40 USA model. I've been putting interior back together and wiring. Was putting the radio in last night. From retrosound. It has a plate on the front that causes the knee pad pieces to be about 1/8" off the metal dash for a very short segment. (see pic how the black plate goes under the driver side knee pad for just a bit. this is before I restored the body tub. I'm working with fresh paint now. Anyway, i don't recall if there are clips that hold the knee pads on or if I need to use adhesive to keep things as flush as possible. Advice / experience with this is appreciated as always!