Fj-80 tie rod tube adapters

[fj40forlife]

Getting some high steering arm that run with Fj-80 tie rods. But don't have any links/drag link for them. Plus I need a Chevy end for the pitman arm. I was trying to find a tube adapters on a few places. But cant seem to find one. Looks like they just tapped on the material. If thats the only other way what size tap is it?

 

[fj40forlife]

Did I just find what I was looking for?
23 MM tube adapters
LOW RANGE OFFROAD

 

[Poser]

Those would be the pieces you were looking for....

 

[fj40forlife]

Or I would go with this

Front range off road fab, Just gave them a call and would do any size. Plus they could tap 7/8 for my pitman arm side

Front Range Off-Road Fabrication

 

[Dusty]

balistic fabrication has the 80 series tube adapters. i have used them in my build

 

[tornadoalleycruiser]

ok reviving this thread.. Gotta question related to this.
Does anyone sell a 21mm weld insert, lh and rh
and 21mm Jam nuts LH and RH
I've only found 23mm.. Before you flame me for being in the wrong area, it'll be for a custom relay rod utilizing Fj60 TRE's on my FJ45 using the FJ60 power steering box so I can keep the PTO winch.
Plan to utilize FJ60 TRE's and Steering box but everything needs to be shortened. And of course I can have one built just thought it'd be easier to have some inserts avail. Will have one built if needed.
Just slowly lining up parts.
TIA..

 

[chicago]

Check low range off road. They had a bunch of different sized weld in tube ends. If you go w those, be damn sure you weld em with the rod end threaded in the threads... I had to actually send mine out to get re tapped cuz the threads warped so bad. The cost of those odd sized dies was phenomenal.

HTH!

 

[rusty_tlc]

They don't list the size you want but I'm pretty sure they carry them if you call;

Blue Torch Fab


Spidertrax

 

[tornadoalleycruiser]

Will give em a call.. Thanks all..

 

[IBCRUSN]

Try Bud at BudBuilt for the 21mm stuff. He had the jam nuts a couple years ago and I think he had inserts as well.

 

[KyleT]

Poly Performance JEEP/TRUCK & BUGGY :: Rod End Hardware :: Synergy Suspension Threaded Weld-In Tube Adapter - 4X4 Off-Road Parts, JK Synergy Suspension Systems, Fox Racing Shox, Beard, CNC Brakes, Johnny Joints®, Currie Enterprises, Edelbrock, Pit Bu