Early wiper motor (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Blackcat37

SILVER Star
Joined
Jul 21, 2015
Threads
23
Messages
208
Location
Auburn Ca
So I am trying to rebuild my wiper motor and am wondering what others have used to replace the rubber rectangle piece? There also another small rubber spacer I need to find also.

5585151D-90F4-4C53-9D15-F7B90CAAA109.jpeg


3C249CA9-DEDE-45E0-8201-38D76809C833.jpeg
 
Hopefully the rubber rectangle piece will be available sometime soonish. Someone on Mud is working on it. I haven't found a replacement for the rubber spacer, maybe someone here has.
 
Hopefully the rubber rectangle piece will be available sometime soonish. Someone on Mud is working on it. I haven't found a replacement for the rubber spacer, maybe someone here has.
I have had good luck using a hood prop rod grommet from a later 70's Cruiser which works beautifully in conjunction with the OE washer over it.
 
I believe @andybudge was reproducing them last year.


As for that other rubber piece,

They are used on other universal wiper motors like:
The other wiper motors are reversed polarity than the Toyota motors so you can't just swap them over...

 
Does anyone have any recommendations on who does rebuilds? I have several motors that need to be rebuilt.

Thank you in advance!
 
Thanks everyone I reached out to Andybudge to see if he is still making them since its a old thread. If not I will try and find something I can make work.
 
So I talked to Andybudge and he doesn’t have them made yet so I have been playing around with it. Here is the first test but with regular resin on the 3D printer. My buddy is printing it and it needs a few things fixed on it. Just ordered some flexible resin to see how that turns out. I will be able to put the lettering on the terminals holes like the original.

21C9D79B-0BB8-4716-9E3F-A88B26711BB3.jpeg


8099EDC2-4193-4219-93EF-89C655823973.jpeg


79E63108-F1AC-4BD9-9728-FD99AC29D1B9.jpeg


CCE48B83-ED9B-4C41-993A-1F1BAC8CC2B3.jpeg
 
Last edited:
I am waiting on the flexible resin to see how that turns but I modified it some. For some reason it won’t print the S very good.
 

Users who are viewing this thread

Back
Top Bottom