- Location
- United States
Hi, anyone selling a elocker for a 9.5” Land Cruiser axle?
Im in California
thanks!
Im in California
thanks!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Do you have pictures?I’ve got one for a 100 series. $600 shipped.
Only factory rears exist for the 100 that I know of. This is out of a 98 wrecked stock rig 258k. I rebuild the actuator. than an 80 series customer of mine was hot and heavy for an actuator so I repined for his 80. So trashed actuator included. Was going to do an air cylinder or something with it. Have factory wiring dash knob and what not I can include.Do you have pictures?
Its on the rear or front diff?
Great you know about the topic, because I don’tOnly factory rears exist for the 100 that I know of. This is out of a 98 wrecked stock rig 258k. I rebuild the actuator. than an 80 series customer of mine was hot and heavy for an actuator so I repined for his 80. So trashed actuator included. Was going to do an air cylinder or something with it. Have factory wiring dash knob and what not I can include.
Has 4.30 gears but have factory 4.10 gears on hand I can swap on or new nitro gears, I’m a dealer/installer
View attachment 2659883
View attachment 2659884
View attachment 2659885
No the spline count and axle shaft diameter is different on a 100. You could if you rebuilt it with 80 parts.Great you know about the topic, because I don’t
can it be fitted in the front of a Fj40?
I have 4.11 gears
I concur, but the authority has spoken. so really this is a useless post.No the spline count and axle shaft diameter is different on a 100. You could if you rebuilt it with 80 parts.
Maybe someone with Fj80’s Locker around?I concur, but the authority has spoken. so really this is a useless post.
Will bolt into a 91 80 semi float?Only factory rears exist for the 100 that I know of. This is out of a 98 wrecked stock rig 258k. I rebuild the actuator. than an 80 series customer of mine was hot and heavy for an actuator so I repined for his 80. So trashed actuator included. Was going to do an air cylinder or something with it. Have factory wiring dash knob and what not I can include.
Has 4.30 gears but have factory 4.10 gears on hand I can swap on or new nitro gears, I’m a dealer/installer
View attachment 2659883
View attachment 2659884
View attachment 2659885
Same issue you’d need to replace spiders to 30 spline.Will bolt into a 91 80 semi float?
don’t mean to high Jack sorry.
I have what you need. I PM’d you.Hi, anyone selling a elocker for a 9.5” Land Cruiser axle?
Im in California
thanks!
Is this still available with the 4.3 gearing???Only factory rears exist for the 100 that I know of. This is out of a 98 wrecked stock rig 258k. I rebuild the actuator. than an 80 series customer of mine was hot and heavy for an actuator so I repined for his 80. So trashed actuator included. Was going to do an air cylinder or something with it. Have factory wiring dash knob and what not I can include.
Has 4.30 gears but have factory 4.10 gears on hand I can swap on or new nitro gears, I’m a dealer/Installer.