I've been trawling the web has hard as I can, but I cant seem to find any info on the little black standoff for the front seat belts. Looks like the PO removed it at some point. Any idea where I could source one?
Drivers seat belt mounting hardware
- Thread starter JustAnotherDave
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #3
Sorry, dumb assumption they were all the same for 80s. It's a 95.
I just need that long, black standoff that holds the seat let mounting plate off of the body of the truck.
I just need that long, black standoff that holds the seat let mounting plate off of the body of the truck.
mudgudgeon
Resident galah
Go to a pick and pull wrecking yard.
Seat belt hardware is fairly universal, if you can't find an 80, it wouldn't take long to find something that would work from another vehicle
Seat belt hardware is fairly universal, if you can't find an 80, it wouldn't take long to find something that would work from another vehicle
1973Guppie
Supporting Vendor
for the seatbelts on the 80 the thread pitch is very specific, at least for the 2nd row pillars. Toyota only sells the belts as a complete unit. ig you can find the right pitch bolt you can just find a spacer. at the local hardware store.
mudgudgeon
Resident galah
My understanding is all seatbelts use 7/16 UNF as an international standard.
May be wrong though.
Check with @slow95z . He will most likely have the parts.
1973Guppie
Supporting Vendor
could be, dunno, I just know I could not find the correct thread pitch anywhere locally
