Does a Toyota front brake spring/clip/ kit exist?

[jestlurnin]

I’m going to knock out a front rotor and pad replacement on the 07 LX470 over the thanksgiving weekend.

I purchased everything from my local yota parts department but realized I didn’t get all the little doo dads that attach to the pads etc. I saw a kit on rock auto but it’s almost easier for me to pick up at my local parts counter.

Is there just a kit you can buy from Toyota or does one have to piece it all together? If a kit exists a part number would be awesome!

Also looking for the part number for the snap ring....forgot that as well.

thanks everyone!

 

[divemedic]

Call Cruiser Outfitters.

 

[Ayune]

Just did this last weekend. For my ‘98 LC the parts are below. Check if they’re different for your ‘07.

47748-60061 - Anti rattle spring, need 2
04947-60100 - Pad clamp “fitting” kit, need 1
90240-06024 - Pad retention pins, need 4
90080-46209 - Pin retainer clip, need 2

I reused the anti-squeal shims already in there. That kit is spendy at around $50 and after cleaning the old ones they’re still in great shape. Some say the shims won’t even fit so they omit them.

The snap ring part numbers are 90520-31005 thru -31010. Each number is a different thickness.

 

[jestlurnin]

@Ayune thank you!! That’s exactly what I was looking for! @divemedic cruiseroutfitters is generally my go to for stuff like this. They ALWAYS get it right.
Thank you!

 

[jestlurnin]

FYI cruiser outfitters does not stock 100 series/LX 470 brake doo dads. Instead took the info above to my yota parts counter and should have everything Monday.

 

[Hugh Heifer]

FYI cruiser outfitters does not stock 100 series/LX 470 brake doo dads. Instead took the info above to my yota parts counter and should have everything Monday.

Did you verify the numbers?
If so that would indicate these are good parts through nearly 10 years and make this thread particularly useful to everyone on here who does their own wrenching.

 

[jestlurnin]

I did not verify. I guess I’ll find out next weekend if I should have! Will post up when I dig into the front brakes!