Hi, I will replace the serpentine belt tensioner assembly and alternator these days, I reviewed the faq, I found this:
"5. Remove pulley from power steering pump; 17mm nut with box end wrench" in the guidelines of how to replace serpentine belt tensioner.
My question is:
1. do we really need to remove the ps pump pulley to get this job done? will removing all the mount bolts of the ps pump and push it a little forward work for this case?
2. what is the torque spec for the serpenting belt tentioner assembly mount bolts?
3. what is the torque spec for alternator mount bolts?
Thank you so much!
"5. Remove pulley from power steering pump; 17mm nut with box end wrench" in the guidelines of how to replace serpentine belt tensioner.
Serpentine Belt Tensioner Replacement
Had to replace the serpentine drive belt tensioner at 140,000 miles and used the following procedure. Serpentine Belt Tensioner Replacement 1. Remove front belly pan (engine under cover); 8 bolts @ 12mm, recessed bolt is machine thread, others are self tapping 2. Remove engine V-bank...
forum.ih8mud.com
My question is:
1. do we really need to remove the ps pump pulley to get this job done? will removing all the mount bolts of the ps pump and push it a little forward work for this case?
2. what is the torque spec for the serpenting belt tentioner assembly mount bolts?
3. what is the torque spec for alternator mount bolts?
Thank you so much!