1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Do chevy wheels fit?

Discussion in '40- & 55-Series Tech' started by garsticker, Mar 2, 2004.

  1. garsticker

    garsticker

    Messages:
    16
    Likes Received:
    0
    Joined:
    Feb 21, 2004
    I was told by a cruiser guy that six hole chevy truck wheels will fit my 82 fj60...can they? also how does a stock 2f handle 33x12.50's? good bad or ugly?
     
  2. Jesse

    Jesse

    Messages:
    25
    Likes Received:
    0
    Joined:
    Oct 24, 2003
    I may be wrong but i dont think the chevy wheels will fit ovet the front hub. I tried to fit some but the center hole is too small.
    I had 33s on my FJ40 with a 2f and it drove fine.
    Jesse
     
  3. dylan

    dylan

    Messages:
    246
    Likes Received:
    0
    Joined:
    Dec 23, 2002
    jesse is right, the center is bigger on toyotas
     
  4. cruiserdan

    cruiserdan SupportingVendor Emeritus Moderator

    Messages:
    21,567
    Likes Received:
    4,676
    Joined:
    Mar 27, 2003
    Location:
    Surrounded by Cruisers from all over the world
    I had a set of 15x8 Chevy ralley wheels on my mini truck. I had a friend with a lathe cut the centers out of them to clear the front hubs. They looked cool and fit well. I do not know if they would clear the tie rod ends of a 40, 55 or 60 as they have more back-setting than aftermarket wheels.

    This poor photo is the only one I can find of the truck at the moment, it is 18 years old. (Have you ever skinned a deer with a winch?)
     
  5. HI^C

    HI^C

    Messages:
    1,234
    Likes Received:
    2
    Joined:
    May 22, 2003
    stock chevy wheels will not, but any 6 lug rim could fit on a cruiser, 6 x 5.5

    almost all aftermarket wheel will come with the larger center bore to fit on just about all vehicles.

    chevy center bore 4.56 most ford and dodge are 4.77 or so.
     
  6. garsticker

    garsticker

    Messages:
    16
    Likes Received:
    0
    Joined:
    Feb 21, 2004
    Thanks..I found some aftermarket 16 inch wheels and they fit great...
     
  7. cwb

    cwb

    Messages:
    353
    Likes Received:
    2
    Joined:
    Dec 5, 2002
    Tell us about what you found. I'm also looking for some 16 inchers!
     
  8. VTCruiser

    VTCruiser

    Messages:
    3,454
    Likes Received:
    13
    Joined:
    Sep 12, 2003
    Location:
    Tacoma, WA
    No experience but i have been told 12.5's will rub, 33x9.5 are fine, and 10.5 is borderline depending on spring condition.