Hey folks, Filip from Dissent here.
Good news, I know a lot of people have been waiting for the skids to come back... They're back! They are only going to be on sale for a short while and will go back out of stock. Our plan is to make skids in limited runs a couple times a year. Skids will start shipping in October (sooner if we can). If you have a Dissent front bumper already make sure to state so in the comments when you check out.
We have confirmed fitment of the third skid on the LX570, so we are only selling the 3 piece skid for both the LC and LX. What we have found is that a small number of LC200 and LX570 frames lack the threaded holes required for the frame stiffeners that go with the third skid. In that case the stiffeners are optional, that third skid (transmission/transfer case skid) still installs without the stiffener and is still functional. Putting rivnuts in the frame would also work but access is limited.
In other product news we are almost caught up and we are reducing lead times across the board. We still have some LC200/LX570 rear orders to fulfill so we haven't reduced the lead time for that product just yet but we do expect next month it will jump to a 6-10 week lead time and stay there. If you order a rear today you'll likely get allocated a bumper in the very next batch which we hope to run later this month.
We have short lead times on all LC200/LX570 fronts right now, 3-6 weeks if you're not ordering other products like a rear.
Roof Rack News - Expect us to do a limited run of these later this year, sign up for the email alert on the product page.
Slider News - There is a very small chance we'll do a limited run of these, if we have time and material we will. Sign up for the email alert on the product page.
Good news, I know a lot of people have been waiting for the skids to come back... They're back! They are only going to be on sale for a short while and will go back out of stock. Our plan is to make skids in limited runs a couple times a year. Skids will start shipping in October (sooner if we can). If you have a Dissent front bumper already make sure to state so in the comments when you check out.
We have confirmed fitment of the third skid on the LX570, so we are only selling the 3 piece skid for both the LC and LX. What we have found is that a small number of LC200 and LX570 frames lack the threaded holes required for the frame stiffeners that go with the third skid. In that case the stiffeners are optional, that third skid (transmission/transfer case skid) still installs without the stiffener and is still functional. Putting rivnuts in the frame would also work but access is limited.
In other product news we are almost caught up and we are reducing lead times across the board. We still have some LC200/LX570 rear orders to fulfill so we haven't reduced the lead time for that product just yet but we do expect next month it will jump to a 6-10 week lead time and stay there. If you order a rear today you'll likely get allocated a bumper in the very next batch which we hope to run later this month.
We have short lead times on all LC200/LX570 fronts right now, 3-6 weeks if you're not ordering other products like a rear.
Roof Rack News - Expect us to do a limited run of these later this year, sign up for the email alert on the product page.
Slider News - There is a very small chance we'll do a limited run of these, if we have time and material we will. Sign up for the email alert on the product page.
