Dissent offroad modular front bumper (1 Viewer)

[benc]

Also, rtv silicon could be applied to the layers if needed

 

[tims landcruiser69]

ok so are you in production of these frount bumpers ? I would definely one soon and will it fit on a 2000 toyota landcruiser uzj100?

 

[benc]

Pm sent^^^

 

[benc]

Here is the price list

 

[benc]

Here is an updated price list. I did have to come up some to cover the increase in production cost due to all the different options. All prices are for the modular bumper.

Front without bull bar, $975
Single stinger, $100
Full bull bar, $200
No winch cut outs, $25
Flush mount led cutout, $50
Bullet led blinker cutouts $25
Brackets for 1" body lift,$75
Front receiver, $100
Hardware kit. Will include all grade 8 bolts to the frame and stainless button head bolts for the rest. $35
Light tabs to your specs on upper bar$25
Powder coat $150-200,

DIY prices.
Front, no bull bar,$550
Single stinger, $50
Full bar, $100
All other options the same as above.
Eta is still a little up in the air but I'm hopping to ship the early orders out mid April and the later out by mid may. If you choose powder coat that will put you out another week or two. Again thanks for all your patience and you won't be disappointed.

Price list

 

[Lowbudgetlc100]

Anyone in SoCal area want to combine shipping let me know

 

[EarthX]

yup, I'm in if it lowers our shipping costs.

 

[Lowbudgetlc100]

yup, I'm in if it lowers our shipping costs.

Nice not too far.

 

[bhicks]

yup, I'm in if it lowers our shipping costs.

I might be in as well. Up here in the San Berdu mtns. like yourself. I'm looking for the DIY kit. Not sure what shipping on that is at this point.

 

[atomsk]

Where you guys at? I'm in OC. I might be down for that. One thing to keep in mind is some people will have theirs done weeks before others. Things like powder coating could add more time as well.

@benc - Is this ok or more of a hassle for you?

 

[benc]

It would be fine with me, but it looks like is will only save about $10 each on shipping. What would be best is if any one will headed to nor cal and could pick up. That is what some guys from Oregon are doing.

 

[bhicks]

I will be camping in Kings Canyon in June. How far are you from Kings Canyon national park? What is the cost to ship to socal for one DIY kit? Just want to know if it's even worth trying to meet up with you in June.

 

[benc]

I will be camping in Kings Canyon in June. How far are you from Kings Canyon national park? What is the cost to ship to socal for one DIY kit? Just want to know if it's even worth trying to meet up with you in June.

About 5 hours from kings canyon, shipping looks like it will be about $100 for the DIY to SoCal

 

[bhicks]

Wow. Your way up North. It will cost me more in gas to make that 5 hour drive then to just pay the shipping. I guess I will just be shipping it unless I can find someone heading south. I go up to Oregon every other year to visit family but this is the off year.

 

[Get outside]

@benc Sent you a pm with bumper info.

 

[EarthX]

Missed your call. I'll get you a call tomorrow.

 

[benc]

@benc Sent you a pm with bumper info.

Received, the holes are still in the risers they just will not be dimpled. Do you still want the risers straight and the center tube straight? If so, the risers are the same but you may need to trim the bottom of them to your desired height. I just need to know if you want the top tube straight? Thanks

 

[benc]

Missed your call. I'll get you a call tomorrow.

Sounds good, thanks

 

[Get outside]

Hey Ben, did you delete the original tread for this bumper? I went to look at some of the pics but can't find it anymore! I'm pretty sure I had subscribed to it to make sure I could go back.

 

[benc]

Hey Ben, did you delete the original tread for this bumper? I went to look at some of the pics but can't find it anymore! I'm pretty sure I had subscribed to it to make sure I could go back.

No, I think it got merged to this one.