Dissent offroad modular front bumper (1 Viewer)

[suprarx7nut]

First off, sweet bumper... again! The aluminum is great for the more... street oriented owner, haha.

Yes, water jet would be the way to go for sure! Unfortunately my options where I'm at are limited.

Have you tried some of the big outfits in the US? There should be someone with good shipping options for you unless you are in an area delivery services charge extra for, I guess. If laser really is that much more that seems like a worthy effort.

In my recent CNC-routing vendor search for my recent platform system I found a place in Michigan that was significantly cheaper than any local place, even after including shipping costs.

 

[FLWookie]

CNC router is another option depending on the gage of the aluminum. That's probably the fastest cutting option. Really you're paying more for setup cost than the actual goods usually.

 

[benc]

@benc how much do you charge to install the front bumper? Would love to drive down from SLC and have you install one!

Typically around $250 for the bumper and $75 for winch and lights wiring.

 

[benc]

First off, sweet bumper... again! The aluminum is great for the more... street oriented owner, haha.



Have you tried some of the big outfits in the US? There should be someone with good shipping options for you unless you are in an area delivery services charge extra for, I guess. If laser really is that much more that seems like a worthy effort.

In my recent CNC-routing vendor search for my recent platform system I found a place in Michigan that was significantly cheaper than any local place, even after including shipping costs.

Thanks!

The aluminum will be a great option for 99% of 100 owners.
Me and my buddy wheel some harder trails than most and we will both be running the aluminum version once done.

Once I get all my files finished I can price shop, the tough part is I really haven't had the time to shop around so I end up paying more to the shop that's 15 min away due to convenience.

 

[rjones]

Wow took me all week but I just finished this entire thread! Pretty interesting last 30 months for you (benc) huh? Your work is top notch man, those bumpers are fantastic.

Are you taking or considering taking pre-orders for the aluminum version? I'll take the no-shipping option here in Elk Grove.

rjones

 

[benc]

Wow took me all week but I just finished this entire thread! Pretty interesting last 30 months for you (benc) huh? Your work is top notch man, those bumpers are fantastic.

Are you taking or considering taking pre-orders for the aluminum version? I'll take the no-shipping option here in Elk Grove.

Haha, thanks!
Yeah, its pretty crazy how this whole thing started!
Just wanted to get 5 guys together and never planed or thought this would turn into a full time business.
Yeah, I'd be willing to take preorders on the aluminum.
I have a good idea on the price but not nailed down 100%.
Will not be any more than $1475 though.
I'm also not sure if I'll offer the bull bar in aluminum or not.
I'm about 12 weeks out so the aluminum will likely be ready before that.
I think I'll go ahead and start a new thread to gauge interest in the aluminum so keep an eye out for that.
Pm me if you would like to get your name down.
Thanks!
Ben

rjones

 

[benc]

Thanks Duncan!
It was great meeting you yesterday!
Here is his 07 lx470 with full bar, evo gray on the main bumper and bk01 textured black on the rest.
Turned out great!

 

[COGerding]

Thanks Duncan!
It was great meeting you yesterday!
Here is his 07 lx470 with full bar, evo gray on the main bumper and bk01 textured black on the rest.
Turned out great!

View attachment 1468045

View attachment 1468046

View attachment 1468047

View attachment 1468048

View attachment 1468049

@benc thank you! Couldn't be happier with how it turned out. I got compliments from people at hotels and gas stations all the way home. I find myself going out to the garage to stare at it for a bit ...

I washed it as soon as I got home - bumper stood up to the bugs of Nevada. Here's a few more close up pics of some of he detail work and lights. Celebratory cigar for a new member of the family ...

 

[jerryb]

looks good Ben. Thanks.

 

[benc]

looks good Ben. Thanks.

View attachment 1473581

My pleasure!
Thanks for the pic.

 

[Teej]

Maybe this has been addressed already, but I would like to know if I can install my rigid Fog lights into the hole you cut into the front bumper? If not, what brand of lights are they, how do they stand up performance wise, and how much do they cost? I can always mount the rigids somewhere else.

 

[benc]

As long as they are the rigid flush mount lights they will fit.

 

[od4x4]

Drove up north this weekend to spend a few days with family... and to pickup this from Dissent!

Brand spankin new Dissent OffRoad front bumper installed by Ben! I love it but more importantly my wife loves it (it is her Land Cruiser after all). Ben is a true craftsman and the level of detail is amazing.

BUT the best part is that this followed us home!

I won't say any more because I don't want to rub it in. But needless to say I am a pretty happy guy and I have one of the best looking cruisers parked in my driveway. (I know that might be a little biased...)

Anyway ... thank you Ben! It was great to meet you in person and I am very glad that I had to opportunity to have you work on the LC.

Tom

 

[planomateo]

That looks great @od4x4

 

[benc]

Thanks Tom!
It was great meeting you and your family!
See you in a few weeks in Colorado.

Drove up north this weekend to spend a few days with family... and to pickup this from Dissent!

Brand spankin new Dissent OffRoad front bumper installed by Ben! I love it but more importantly my wife loves it (it is her Land Cruiser after all). Ben is a true craftsman and the level of detail is amazing.

BUT the best part is that this followed us home!

I won't say any more because I don't want to rub it in. But needless to say I am a pretty happy guy and I have one of the best looking cruisers parked in my driveway. (I know that might be a little biased...)

Anyway ... thank you Ben! It was great to meet you in person and I am very glad that I had to opportunity to have you work on the LC.

 

[RootMeanSqr]

... I have one of the best looking cruisers parked in my driveway.

Do others have cruisers parked in your driveway too? Just kidding. Clean looking rig! Dissent bumpers are in my future.

 

[screendoor]

Here is my front bumper in a side canyon up Nine Mile Canyon, Utah. Need to mount my winch control box - still working up the nerve to cut the trim to make room for routing the control cables.

 

[geanes]

Here is my front bumper in a side canyon up Nine Mile Canyon, Utah. Need to mount my winch control box - still working up the nerve to cut the trim to make room for routing the control cables.

That is sweet. Looks like you color matched the cladding on the wings?

 

[taco47001]

@benc how are you wiring the turns and fogs when you install at your shop? Have you sourced stock plug and play connectors or are you cutting the cruiser side plug off and installing your own water time connector?

 

[screendoor]

That is sweet. Looks like you color matched the cladding on the wings?

Yes, I did my best to match the wings to the cladding.