disc brake backing plates

[rsc71]

picked up an disc brake axle and it dosnt have backing plates.do i need to run them or the equivalent space between the spindle and knuckle?

 

[kyot4x4]

I think Downey makes a backing plate eliminator. hope it helps

kyle

 

[pappy]

I know Trail Gear does.

 

[SaveTheCruiser]

Downey has it too. For the same price as the trail gear place.

Maybe you can get Downey to take a couple bucks off it to buy it there. He posts here often.

Here is his link scroll to the bottom.

Downey Off-Road

 

[pappy]

Just keep in mind there are brake bits attached to the backing plate and you will need to engineer an alternative.

 

[BELMONT148]

Nothing the proper brake hose won't cure. In response to the brake bits part that is.

You do need atleast the spacer, it gives the proper shiming for the spindle.

Jeremy

 

[rsc71]

Nothing the proper brake hose won't cure. In response to the brake bits part that is.

You do need atleast the spacer, it gives the proper shiming for the spindle.

Jeremy

yes i have seen alternatives,just wanted to make sure on the running some type of space or if it wasnt nessecary.thanks for the responses