Costa Fabrications intro and offerings.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I finished up and shipped some more bumpers today. One of which was the bumper with the rigid D2 lights cut in. After getting the wings on the center section i decided it didn't look right. So here is what they ended up like.
20160413_110016.jpg
20160413_174014.jpg
20160413_173945.jpg
20160413_174247.jpg
 
Just to mix it up... some none cruiser work I have going on now as well. I did the rack which holds a rooftop tent and front winch bumper on this 2015 Outback. It's back for me to design a winchmount that mounts under the stock facia and only shows the Fairlead. He will be selling them on his site.
20160409_153111.jpg
20160409_153038.jpg
20160409_153158.jpg
the rack is a mix of square and round tube and bolts down on the factory mounts in the roof. It also has a mesh floor section up front. Also the limb risers are not attached yet. You can see the attachment points on the outer hoops.
 
Can't wait to see what you come up with for the rear. I have a 2nd 80 that I have been holding off armoring until I see what you come up with. Are you thinking about offering both flare and non flare options?
 
Can't wait to see what you come up with for the rear. I have a 2nd 80 that I have been holding off armoring until I see what you come up with. Are you thinking about offering both flare and non flare options?
Yes. The first is flared though. I'll honestly build whatever anyone wants. It doesn't even have to be related to automobiles. I just love creating and building. So if you or anyone wants something unique for your home or office Pm me. I also work with a variety of materials. I'm also building a really cool wine table from a big leaf maple burl. I'm in the design phase of the legs or base on that one. I want to incorporate the new plasma table with that build.
 
Any chance you'd be interested in making a 40 series bumper that will fit a warn 8274?

I would but I don't currently have a 40 series to use for mock up. Unless you are local to me? I may have a gentleman bringing his 40 series for a rear bumper to me in the beginning of summer. I can let you know if that comes about. And he probably wouldn't mind leaving it a little longer to build up a front.
Thanks for your consideration though!
 
You can follow me on Facebook to see what I'm up to when not posting on here as my website is still being developed. Here are some pics of the 80 series bumper I currently offerView attachment 1199979 View attachment 1199980

I don't have an 80, but this is what mine would look like if I did. Love th3 steel wheels, and the bumper is about perfect.
 
I would but I don't currently have a 40 series to use for mock up. Unless you are local to me? I may have a gentleman bringing his 40 series for a rear bumper to me in the beginning of summer. I can let you know if that comes about. And he probably wouldn't mind leaving it a little longer to build up a front.
Thanks for your consideration though!

Thanks for the info! Unfortunately I'm no where near you but if I was I'd let you have it for as long as you needed. I'll keep up with your thread to see if you build some 40 stuff moving forward.
 
Nice to see more options out there for the 80! I like your Frost River bags! I have one for travel and gifted a few as well, love them.
 
Nice to see more options out there for the 80! I like your Frost River bags! I have one for travel and gifted a few as well, love them.

Thanks. And yes they make really nice quality bags and they are great people to work with. I've been talking with them about a tool roll as well.
 
Can't wait to see the Rear Bumper. I've got another guy on board for a set too. I like the Rigid pods in the front bumper.
That's great and I'm working on the rear now. I should have something to show by the end of the week.
Thanks for the support!
 
SEND PICS OF THE REAR!!!!!!!! I need a rear bumper and cannot wait much longer!
 

Users who are viewing this thread

Back
Top Bottom