**CLOSED**4X4 LABS Tax Season Group Buy ends 5/9

[HAAANK]

****CLOSED****


With tax returns burning holes in pockets it seems like the perfect time for a group buy.

Who's in?


====================
DISCOUNT CODE: ih8mud
====================

15% OFF KITS, 10% OFF FINISHED

Buy here:
4X4LABS


Shipping begins mid May 2016






More details on the front bumper: Jose's thread
Front bumper facelift: AOE to 4x4Labs

===========================
Pre Discount Pricing and Parts
80 and 100 series bumpers and bumper kits
===============================

(40, 55, 60 series bumpers are identical price although some parts in the list below may be different)

Front Bumper $600 kit, $1250 built and powder coated
You will need to specify winch make and model when ordering on the website


Basic bumper- kit $495 Welded and finished $895
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver

Single swing out bumper- kit $895 Welded and finished $1375
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
1 large spindle assembly
1 swing arm assembly with 4 sleeves
Latch and latch plate
1 gas strut with ball stud
2 stoppers

Double swing out bumper- kit $995 Welded and finished $1495
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
2 large spindle assemblies
2 swing arm assemblies with sleeves
Latch and latch plate
2 gas struts with ball studs
3 stoppers

Attachments

Tire holder- kit $125 Welded and finished $225
Swing out clamp bracket
Main upright
2 gussets
Side clamps
Top cap
3 hole tire holder
Square tube receiver
3 wheel studs
3 lug nuts
Hardware

One, two or three gas can- kit $195 Welded and finished $395
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Ladder #1 – kit $150 Welded and finished $350
Swing out clamp bracket
2 Base tubes
2 rungs
Hi-lift bracket with standoff

Ladder #2- kit $175 Welded and finished $375
The first rung on this ladder is sleeved for a third accessory.
Swing out clamp bracket
Main hoop
1 round rung
1 square sleeved rung
Hi-lift bracket with standoff

Cooler basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops your supplied dimensions
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

ARB fridge basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Bicycle rack, 2 bikes- kit $195 Welded and finished $295
Swing out clamp bracket
Main upright
2 base gussets
Rear tire plates
Rear tire plate cross member
Rear tire hold down straps
2 skewer tubes
2 skewers
Safety hook
Top cap
Logo plate

Separate bumper parts

Main Shell- Formed and plasma cut bumper shells for FJ80 and FJ60 $185
Uncut formed main shells 72″ wide- $125
Formed laser cut side skid plates- $125 ea
HD Spindle assemblies- $95 ea.
Swing out assemblies- HD spindle assembly, sleeved swing arm with gas
Gas shock, ball studs and stops – $225 ea.
Accessory bracket clamp- $25
Towing receiver- $25
Recovery points- $30 ea.
Hi-lift bracket- $25
License plate bracket- $10
De-sta-co 4000 lb. Latch and latch plate- $95
Gas struts 120 lb. $25 ea.
Ball studs $2.50
6″ or 8″ Gusset $9
Accessory carrier retrofit sleeve/clamp kit- $29

 

[ewillis]

With tax returns burning holes in pockets it seems like the perfect time for a group buy.

Who's in?


====================
Details
====================


Kits start shipping in two weeks

Ordering will happen on the soon to open 4×4 Labs online store


More details on the front bumper: Jose's thread
Front bumper facelift: AOE to 4x4Labs

Pricing and parts list for 80 and 100 series bumpers and bumper kits

(40, 55, 60 series bumpers are identical price although some parts in the list below may be different)

Basic bumper- kit $495 Welded and finished $895
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver

Single swing out bumper- kit $895 Welded and finished $1375
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
1 large spindle assembly
1 swing arm assembly with 4 sleeves
Latch and latch plate
1 gas strut with ball stud
2 stoppers

Double swing out bumper- kit $995 Welded and finished $1495
1 main bumper shell
2 sides
2 side top tubes
2 recovery points
Towing crossmember
Receiver
2 large spindle assemblies
2 swing arm assemblies with sleeves
Latch and latch plate
2 gas struts with ball studs
3 stoppers

Attachments

Tire holder- kit $125 Welded and finished $225
Swing out clamp bracket
Main upright
2 gussets
Side clamps
Top cap
3 hole tire holder
Square tube receiver
3 wheel studs
3 lug nuts
Hardware

One, two or three gas can- kit $195 Welded and finished $395
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Ladder #1 – kit $150 Welded and finished $350
Swing out clamp bracket
2 Base tubes
2 rungs
Hi-lift bracket with standoff

Ladder #2- kit $175 Welded and finished $375
The first rung on this ladder is sleeved for a third accessory.
Swing out clamp bracket
Main hoop
1 round rung
1 square sleeved rung
Hi-lift bracket with standoff

Cooler basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops your supplied dimensions
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

ARB fridge basket- kit $225 Welded and finished $425
Swing out clamp bracket
Main upright
2 base gussets
2 tubing hoops
Tube spreaders
Bottom plates
2 basket gussets
License plate bracket
Hi-lift bracket with standoff

Bicycle rack, 2 bikes- kit $195 Welded and finished $295
Swing out clamp bracket
Main upright
2 base gussets
Rear tire plates
Rear tire plate cross member
Rear tire hold down straps
2 skewer tubes
2 skewers
Safety hook
Top cap
Logo plate

Separate bumper parts

Main Shell- Formed and plasma cut bumper shells for FJ80 and FJ60 $185
Uncut formed main shells 72″ wide- $125
Formed laser cut side skid plates- $125 ea
HD Spindle assemblies- $95 ea.
Swing out assemblies- HD spindle assembly, sleeved swing arm with gas
Gas shock, ball studs and stops – $225 ea.
Accessory bracket clamp- $25
Towing receiver- $25
Recovery points- $30 ea.
Hi-lift bracket- $25
License plate bracket- $10
De-sta-co 4000 lb. Latch and latch plate- $95
Gas struts 120 lb. $25 ea.
Ball studs $2.50
6″ or 8″ Gusset $9
Accessory carrier retrofit sleeve/clamp kit- $29

View attachment 1241326

Are these "group buy" prices or standard prices?

 

[HAAANK]

those interested from the last thread:
@half k cruiser
@Scrappy4x4
@justinlyman
@Dubbinchris
@bryanb
@1ststatecruiser
@excessive
@Sambosuda
@shadowless
@icorradoi
@moneytimetycoon
@BruceFZJ80
@dirtyboots
@FloridaCruiser813

 

[steven17]

I need a front and rear bumper kit. Where do i sign up?

 

[HAAANK]

Are these "group buy" prices or standard prices?

Pre discount pricing listed above, just awaiting confirmation from Luke on the discount percentage.

 

[HAAANK]

I need a front and rear bumper kit. Where do i sign up?

Once Luke's online store is up I'll add the link and instructions to the first post.

 

[dirtyboots]

Still in for a rear no swing outs thanks @HAAANK for taking point

 

[Colo yeti]

FML I just got mine yesterday. Lol

 

[shadowless]

Did I overlook the pre discount price of a front bumper kit on that list???

 

[Sambosuda]

Iirc front bumpers are $600 for DIY and around 12-1300 finished and welded.

 

[BruceFZJ80]

Does the finished and welded version of the rear bumper bolt right on to the frame with no modifications? and can I still fit my 33" spare under the truck with Luke's bumper?

 

[Sambosuda]

You have to cut off some of the rear crossmember to fit the labs bumper.

 

[FloridaCruiser813]

You already have me on the list here. Still in !

 

[FXJ 96]

Can you confirm it bolts up to existing hitch/OEM bumper location, no drilling or vehicle modifications required beyond removal of all hardware?

If so, in for a fully finished single swing (driver's side) rear bumper if the discount is right.

 

[Sambosuda]

Can you confirm it bolts up to existing hitch/OEM bumper location, no drilling or vehicle modifications required beyond removal of all hardware?

If so, in for a fully finished single swing (driver's side) rear bumper if the discount is right.

4x4labs rear bumper build

Here's a thread Luke did on a DIY kit but the finished kits require the same cutting of the crossmember. All
Other stock holes are utilized.

 

[leonard_nemoy]

I'm in

 

[FXJ 96]

4x4labs rear bumper build

Here's a thread Luke did on a DIY kit but the finished kits require the same cutting of the crossmember. All
Other stock holes are utilized.

Thanks! That pointed me to a better search string and I was able to find more detail here: 4x4labs bumper installation: crossmember cutting

 

[half k cruiser]

@HAAANK I'm definitely in, but shipping would have to happen May 1st or right around there. We are hitting the Ozark National forest first week of June and I will need to get my swing out done in advance of that. I had tried mailing 4x4 labs over a week ago to order the last of my parts but haven't heard back from them.

 

[HAAANK]

@HAAANK I'm definitely in, but shipping would have to happen May 1st or right around there. We are hitting the Ozark National forest first week of June and I will need to get my swing out done in advance of that. I had tried mailing 4x4 labs over a week ago to order the last of my parts but haven't heard back from them.

Contact Luke directly on that one. The plan is to ship on 5/1.

 

[Tex68w]

I'm in for rear swing out with tire carrier and ladder for my 80, I was gonna order tomorrow anyway.