Center Console for 70 series... (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Center Console Pics of 70 series with No Rear Heat.

tlcruiserman said:
Sheldon,

Do you have any pictures of this unit?

Thanks,

Michael

Michael:

Took a few pics for you today anyway...found the right center console on the shelves. Appears to be a 70 series with no rear heat...I couldn't find the lid or the shallow bin that goes on top of the deep bin.

This picture shows that the console is universal for LHD and RHD. The difference is the smaller piece in front that has the cutout on the left or right side depending on where the parking brake lever is at (seems to be this way...but I haven't taken it apart and tried switching the pieces). I think the one that's on the console is for a RHD, and the piece for a LHD is beside it.
December_28_2004_004.jpg


This picture shows just how deep and large that bin is without the rear heater components to take up the room.
December_28_2004_005.jpg


This picture shows the rear of the console. Note that there are no climate controls...instead there's a blank plastic face bolted on.
December_28_2004_007.jpg


Cheers.
 
tlcruiserman said:
Do you have any pictures of this unit?

Not on me. Next time I am out at the shop I will try and remember to grab it and take some pics. If I still had my 70 I would have swaped it in.. no need for rear heater in a 70 up here in Vancouver B.C

Sheldon
 
70sguy said:
Not on me. Next time I am out at the shop I will try and remember to grab it and take some pics. If I still had my 70 I would have swaped it in.. no need for rear heater in a 70 up here in Vancouver B.C

Sheldon


Duh.. thanks Stone!

Sheldon
 
He he he

Hey Dave,

Is that my troopie buddy dave?? HJZ79 pick? No I don't....YET :D


Hey Stone,

Thanks for the compliment, yep that is my welding, actually that was wire welding (ok I forgot to turn on the gas, boy stupid around the holidays..like duh!!! But very strong welds, the modified center console now doubles as a wheel cuck.he he he he he. I was going to TIG weld it but I was in a hurry and a little lazy around the holidays so MIG is was (ok was suppossed to be).

Cheers :cool:

Michael
 

Users who are viewing this thread

Back
Top Bottom