Caster adjustment on HZJ77

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 15, 2019
Threads
2
Messages
17
Location
NYS
I’m trying to figure out how to adjust caster on my hzj77. I don’t see any way to adjust, am I missing something ? Any insights would be appreciated. Thanks. Gratuitous image attached

0A29BB5D-BEF6-4244-998A-87D605564251.jpeg
 
They make degree correction shims that fit between the springs and axle perches
Thank you, do you happen to know manufactures them or where I might locate ? Know that I know, I’ll start searching. Thanks again
 
Like these?

I have lifted 50mm in front inadvertently with hd springs, usually does not require castor adjustment for 50mm, but sometimes I wonder if it would be better. for the diff..
 
just whilst more research..
 
just whilst more research..
Perfect. Right here in the good ole USA. Thanks
 
Caster shims or caster correction trunnion bearings are the easiest option, cut/turn on the axle housing is another option.
 
Caster shims or caster correction trunnion bearings are the easiest option, cut/turn on the axle housing is another option.
Do y'all sell these components out there?
 

Users who are viewing this thread

Back
Top Bottom