Carb just installed, need vacuum hose help (1 Viewer)

[c_fish]

I just installed a Jim C. carb on my 60. I tagged all the vacuum lines before removing so it would be a breeze to put everything back together. Problem is that some tags fell off! Does anyone specifically know the hook up locations for the 4 hoses on the left side of the carb (facing passenger side fender). I know they go to the 4 metal tubes sticking up right next to the metal fuel line that goes into the carb. Just now sure what hose goes where. Or does it not matter?

thanks in advance for any assistance.

 

[gulp3000]

Hope this helps.

#1 goes to the top metal connector

#2 goes to the next one down

#3 goes below #2

#4 goes to the lowest one.

 

[60wag]

Gulp's pic is good. If either of these links work, there's another thread with a pic from the emissions book.

https://forum.ih8mud.com/showthread.php?t=41482


http://pic10.picturetrail.com/VOL326/691553/1566988/77161713.jpg

 

[Mike S]

There is also a diagram inside the engine compartment.

M