Carb Heads (1 Viewer)
- Thread starter 75PIG
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I would use the specs for the '74 carb and then "play" with the jets if it is running too lean. I assume you looked here?
http://www.ih8mud.com/tech/carbinfo.php
Lotsa good info there.
Let me know what you come up with, because that is the same setup I'm going to use on my "new" 2F.
BTW the #'s are in millimeters. Yes 114 = 1.14mm
ED-IT! DejaFricking Vu...I thought I already replied to this! Hey delete one of these things...I almost quit drinking.
Ed
http://www.ih8mud.com/tech/carbinfo.php
Lotsa good info there.
Let me know what you come up with, because that is the same setup I'm going to use on my "new" 2F.
BTW the #'s are in millimeters. Yes 114 = 1.14mm
ED-IT! DejaFricking Vu...I thought I already replied to this! Hey delete one of these things...I almost quit drinking.
Ed
