Buyin', Sellin', and Tradin'

[tgreco]

I always have liked that model 4Runner just wished they were 4 door.

In other news, I just got the go ahead for AOP! I'll probably head up late on Friday.

 

[71-CRUISER]

Selling a pair of TG six shooter knuckles. $200

 

[AuburnFJsexy]

Selling a pair of TG six shooter knuckles. $200

Does it include steering arms?

 

[71-CRUISER]

No but it does include shims.

I do have a set of 4x4 labs arms If you're interested. Tierod behind axle.

 

[86chevota]

Selling my 86' Runner
350sbc TBI
350 Turbo trans rebuilt last sept!
Toyota transfer case
Detroit locker in rear can't remember what locker is in the front
The back has been bobbed
Fiberglass fender flares up from
Warn winch
Cage in back
Everything listed below was done or bought last sept!

New Yukon axles in front. Installed last October
New 36tsl's on bead locks and a new 36tsl spare on a reg black wheel
New paint Massey Ferguson gray
New canvas top
Both front and back seats have been reupholstered
Carpet removed interior floor is Rhino lined
New windshield
New hood
New fuel pump
Tennessee title. Is Street-able even with current tires!
Turn key crawler/ street-able

Asking 5900.00

Call 865-661-1080 for more info or can text pics
Thanks Cory

 

[tgreco]

For Sale: Four (4) BF Goodrich AT KO 33x10.50 15 tires. 2 tires are about 90% tread and 2 tires are about 60-70% tread. The tires are about 1.5 years old with a few trips on them. No plugs or patches.

Asking $500 OBO

 

[86chevota]

New price on the 4runner!

 

[pillguy]

They will look good Tony, hope you get them mounted and can make it to AOP next weekend...

These are the new 37s (and sliders) on the 4Runner

View attachment 1136731

Nick, is that your new truck?

 

[AuburnFJsexy]

Yea, had it since the beginning of May...

 

[TCSTARK]

I have a set of fenders from a 1981 BJ42 that are taking up space. The inner brace and headlight supports were removed by the PO causing spot weld removal holes. If you have the skills and a rusty set of fenders they are salvageable. $100 picked up.

 

[TCSTARK]

Not cruiser related but a good deal otherwise...

We are remodeling our kitchen and have upgraded to a Thermidor range. This dual oven is approximately six years old and it works as it should. We have never had any issues with either oven or the self cleaning mode. All this unit needs is a quick cleaning and a new owner to get back into service.

Asking price is $575/SOLD

We also have a KitchenAid whisper quiet dishwasher. This unit still runs strong and works as it should. The only thing that needs improvement is adding new pieces to the lower basket system.

Asking price is $175/SOLD

Samsung Elect 2.1 cubic foot Stainless Microwave. This wall/cabinet mounted microwave comes complete with mounting hardware. This unit is less than two years old and works perfectly.

Asking price is $200

We are having a community wide garage sale next week and anticipate these items going very quickly. If you want it just send me an email via craigslist and we can arrange for you to look at it.

 

[86chevota]

Selling my 86' Runner
350sbc TBI
350 Turbo trans rebuilt last sept!
Toyota transfer case
Detroit locker in rear can't remember what locker is in the front
The back has been bobbed
Fiberglass fender flares up from
Warn winch
Cage in back
Everything listed below was done or bought last sept!

New Yukon axles in front. Installed last October
New 36tsl's on bead locks and a new 36tsl spare on a reg black wheel
New paint Massey Ferguson gray
New canvas top
Both front and back seats have been reupholstered
Carpet removed interior floor is Rhino lined
New windshield
New hood
New fuel pump
Tennessee title. Is Street-able even with current tires!
Turn key crawler/ street-able

Asking 5900.00

Call 865-661-1080 for more info or can text pics
Thanks Cory

Sold

 

[OGBeno]

I have a set of almost brand new Goodyear Duratracs: 235/85/16 wheels. Bought in April and have about 3k miles on them. Basically brand new. These would work good on 40/60/62/4Runner/70 with 16" rims. These are skinny tires.

I have all paperwork and warranty and road hazard which is transferable as well as free balance and rotation at Goodyear locations nationwide.

Original purchase price: $1200.

$800 or best offer. Local pick upon my or I can deliver in the ATL metroplex.

These were on my 70.

 

[WarWagon]

Some parts that are going to the dump if no one is interested; $35 for running boards. Reach out if interested in other items. Dawsonville.

706-525-8263

 

[BGarcia88FJ62]

Not a bad price for this truck if anyone's in the market.
1979 TOYOTA 4X4 1ST.GEN..STRAIGHT AXLE 140K NICE.AIR.PS.

 

[HERF0318]

Still trying to sell my cruiser. Price is 12k.

For Sale: - '86 FJ60 350TBI $16,000 Augusta, GA

 

[wannabtraveler]

I have a Mini truck complete front axle HUB to HUB w/disc brakes.
Asking $250 obo

Thanks Heather! Good idea!

Hello, where are u located? . I'm in kennesaw

 

[wannabtraveler]

Hello, where are u located? . I'm in kennesaw

Never mind...lol. This is old. Just realized it

 

[FJCRAWLER]

FOR SALE :

Set of Nitto Mud Grappler Extreme mounted and balanced on ProComp steel wheels . These have 4 runs on them and are in great shape . None of the 4 tires have been patched or plugged . They are awaiting a new home .

Tire size : 35x12.50/17R

Wheels size : 17x9 with 4.25 back spacing (should not need wheel spacers)

Can be yours for 1200.00 us dollars .

PM if interested .

View attachment 1126729 View attachment 1126730 View attachment 1126731

Still For Sale

Wheelin season is here .

 

[robustbambi]

Jason (Reevesci here on mud) at Trail Tailor made this bumper for me about a year ago and while theres absolutely nothing wrong with it at all... i now want something different because im just difficult and i can't keep my mind made up haha.

It's a single swingout, centered tire carrier mounted high and tight to the body to keep the spare out of those big Georgia boulders.

Paid $1700+ last year

Your Price: $1400 + shipping (I will deliver within 100 miles of 30080 for free)


Freebies:
- Red TEQ bottle opener. (Use it to celebrate your new bumper purchase)
- 12" Light bar (NOT mounted, so use it where ever you want!)
- Bumper is currently black, but ill spray it what ever color you'd like (as long as that color spray paint is available at my Home Depot lol)

Pictures from install:

(if you're not removing at least one driveshaft to install a rear bumper, you're not doing it right)

(Neat locking thing so you don't destroy your quarter panel)

(FREE LED bar NOT MOUNTED, but is included for you to use how ever you see fit!)

(FREE TEQ BOTTLE OPENER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!)


Most current pictures:

(Hutchinson NOT included lol)

(Rotopax NOT included)

Your Price: $1400 + shipping (I will deliver within 100 miles of 30080 for free)