- Vehicle Model
- 40 Series
- Location
- Buffalo, New York United States
+++ Updated and edited 6/25
Up for consideration is a pair of early 60s TNK wiper motors. Fully restored by me.
For examples of my work, please see this thread:
forum.ih8mud.com
Fully disassembled and degreased. Cases have been painted in metallic silver and clear coated. All original parts, with the exception of 2 reproduction contact covers from Proffitt's Resurrection. Reassembled, greased with lithium stearate grease for improved waterproofing, and adjusted.
Test videos below.
One of the motors has slotted screws and one has the JIS Phillips I am used to dealing with for the late 60s, early 70s units. That is the only difference between them. I believe the slotted screw motor might be slightly earlier than the other.
NB: I had to weld the ends of the drive shafts of these motors, which had become badly degraded due to set screw slippage over the years. I'm no machinist, but it should not affect performance.
$650 plus ship
Up for consideration is a pair of early 60s TNK wiper motors. Fully restored by me.
For examples of my work, please see this thread:
Early FJ40 wiper motor restoration
forum.ih8mud.com
Fully disassembled and degreased. Cases have been painted in metallic silver and clear coated. All original parts, with the exception of 2 reproduction contact covers from Proffitt's Resurrection. Reassembled, greased with lithium stearate grease for improved waterproofing, and adjusted.
Test videos below.
One of the motors has slotted screws and one has the JIS Phillips I am used to dealing with for the late 60s, early 70s units. That is the only difference between them. I believe the slotted screw motor might be slightly earlier than the other.
NB: I had to weld the ends of the drive shafts of these motors, which had become badly degraded due to set screw slippage over the years. I'm no machinist, but it should not affect performance.
$650 plus ship
Last edited:
