Blues Cruise 2025 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm coming down on Thu and my son on Fri.

We are staying at Camp-a-While.

Not sure what I will be driving.
 
Melissa and I have not made reservations yet. The general plan appears to be

Thursday ??am meet at Anthracite park or in Pine Grove, then wheel
Friday ??am again at Anthracite
Saturday ?? Anthracite?

with Pine Grove being the hub for all after wheeling group activities

Is this reasonably correct?
With the much of the southern section of the Parkway still being closed due to Helene damage, we are only looking at the Skyline Drive on the way up. Our sightseeing plans for the return trip might be more by ear (or whim).

Thanks
 
currently my plan to be at Anthracite thursday. Bumper snipped and Uca adjusted properly . Needed wrenches the size of my arm to bust the pesky jam nuts. Prob zip the front sway bar off when I load . Hope it comes down easy. All new junk for it on the way. Couple bolts to move around . Casper has not flex tested with it off. Fun stuff!! Someone please bring a portable grinder and sawzall .. thanks. On the home depot to do list.
I also have an open seat for the duration and I can throw in an extra cot if ya need a camp site.
 
currently my plan to be at Anthracite thursday. Bumper snipped and Uca adjusted properly . Needed wrenches the size of my arm to bust the pesky jam nuts. Prob zip the front sway bar off when I load . Hope it comes down easy. All new junk for it on the way. Couple bolts to move around . Casper has not flex tested with it off. Fun stuff!! Someone please bring a portable grinder and sawzall .. thanks. On the home depot to do list.
I also have an open seat for the duration and I can throw in an extra cot if ya need a camp site.
I will have a grinder and sawzall on the rig, grab me if you need them. We can make proper adjustments as necessary:)
 
sweet Thanks Jeff.. may need some trail clearance
 
yep almost new 37s . took the bumper out of the way yesterday, A guy in our club did cutting, cnc and welding. Gotta go back and clean it all up #do it later. gave it a quick rattle can called it good for now. need to reverse some bolts
 
Hey folks! I started a swag bag for an impromptu winner take all raffle if anyone wants to chip in items.
 

Users who are viewing this thread

Back
Top Bottom