jmylie
Reactions
1,080

Latest activity Postings Post Areas About Post areas Events

    • jmylie
      Looks to be both switches. The light bulbs are attached with solder and both seem to be burnt out. There is 12v at the defogger on the rear windows. Not sure about the fog tail light but the switch looks jerry rigged. The defogger switch is...
    • jmylie
      I had frost on the rear windows of my LJ77, so I went to turn on the rear defooger and the light on the dash to indicate that it is on, did not light up. The rear "fog light" also did not work. There is a 15 amp fuse for the rear defogger, it...
    • jmylie
      jmylie replied to the thread FJ40 Not Running.
      Ballast resister would be my guess. If it starts but does not run, ballast resister.
    • jmylie
      Mice chewing on wire insulation? Bare wire making contact with metal causing the short. Follow the wiring harness as best you can to see if you can find the short.
    • jmylie
      jmylie reacted to bobm's post in the thread Pig Party 2024!!!! with Like Like.
      NH 😉
    • jmylie
      jmylie replied to the thread Soft Top Questions.
      I was going to recommend Dirt Road Tops but her website is blank, however her Facebook page: https://www.facebook.com/dirtroadtops/ Another: https://www.sor.com/cat/268
    • jmylie
      jmylie replied to the thread Pig Party 2024!!!!.
      Being on the East Coast, I may be able to make the Black Hills. Dates?
    • jmylie
      jmylie replied to the thread intermittent overheating 2h.
      Not mentioned but remove the cap from the overflow reservoir and is there a tube connected, so when the radiator cools, it can suck coolant back into the radiator.
    • jmylie
      Ok, a typo 50 kph = 50 x .6 = 30 mph 100 kph on the speedometer, 100 x .6 = 60 mph Actual conversion is .62, so kph x .62 = mph. Much easier to use a phone app.
    • jmylie
      jmylie replied to the thread BJ71 1987.
      Where is the BJ71 being imported from? Is it left or right hand drive? Of course, we need pictures, especially the underside. Look at the classified for 70 series for some comparisons.
    • jmylie
      jmylie replied to the thread New BJ 42 Owner.
      Welcome to the madness! I hope you realize, you can't just have one.
    • jmylie
      https://www.ydr.com/story/sports/outdoors/2022/08/13/catawissa-recreation-area-off-road-atv-use-riding-created-by-pa-dcnr-paragon-adventure-park/65402298007/ Article indicates summer of 2024.
    • jmylie
      jmylie replied to the thread Paragon?.
      https://www.ydr.com/story/sports/outdoors/2022/08/13/catawissa-recreation-area-off-road-atv-use-riding-created-by-pa-dcnr-paragon-adventure-park/65402298007/ Looking forward to this.
    • jmylie
      jmylie posted the thread Paragon? in PA- Keystone Cruisers.
      Any word on when/if the old Paragon will be open? Is there a new name for it?
    • jmylie
      jmylie replied to the thread Carburetor rebuilder.
      Contact Jim: https://forum.ih8mud.com/members/fj40jim.1812/ He is the guru of LC carbs. Just not sure if he still rebuilds them.
    • jmylie
      Very happy with the ride on my LJ77 with a 60 mm Dobinson lift.
    • jmylie
      Head over to the clubhouse forums. You may find a willing local to go and take a look. Send a message to: https://forum.ih8mud.com/members/gun-runner-5.49353/ https://forum.ih8mud.com/members/ldowney.15273/ Both are in GA.
    • jmylie
      Surviving another year with the 40, let’s see that makes 37. Biggest mechanical accomplishment was rebuilding the mini-truck steering box. Best memory was having my youngest daughter make her first trip out to wheel it, we‘ve done a lot of...
    • jmylie
      Finally made to the rubicon. Polled and rattled its way along until my buddy broke his track arm bracket (twice). Fixed it and turned around to get out before it broke again. Guess we’ll just have to go back and finish it another time.
    • jmylie
      This is minor but the windshield wipers on my 40 did not work. I pulled the wiper motor and had it rebuilt. Over a year ago. Re-installed the motor and still no go. I hooked up 12 volts to the motor and I had wipers, so the motor rebuild was...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom