BJ70 Flexible Air Intake Hose

[AlbertoSD]

Greetings,

I am looking for the flexible air intake hose (between aircleaner and air intake) for a BJ70 with a 3B non-turbo diesel engine.

Does anybody knows if this part can be sourced new?...if so, anybody have the part number for it?

Please let me know if you have a used one in good condition that you are willing to part with. Mine is cracked pretty bad and I am looking for a replacement part for it.

I am located in Cincinnati, OH.

Any information would be greatly appreciated.

Thanks,

-Alberto

 

[AlbertoSD]

Found the part #:

17882-58060

Anybody knows if it can be sourced new?...still looking for a good used one. Let me know if you have one in good condition.

Thanks,

-Alberto

 

[Firsttimer]

Hey,

I just got one from:

Customization and Restoration Professionals - Services For Restoring 4x4s - RADD Cruisers, Duncan BC

 

[hoser]

Some leads here:
https://forum.ih8mud.com/diesel-tech-24-volts-systems/332840-discontinued-parts.html

 

[AlbertoSD]

Thanks!

I will check with Radd Cruisers.

-Alberto

 

[wesintl]

while i'm generally an oem fan I went with silicon hoses and alum pipe. It'll probably run half the cost

Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts

 

[Chinesewaiter]

I just replaced the same part on my BJ74. 4Wheel auto had one in stock. Their website is ok, but calling and talking to Dan works better.
C

 

[Radd Cruisers]

We have these in stock.

Genuine parts only.

~John

 

[BTUMAN]

We have these in stock.

Genuine parts only.

~John

I need the two parts for my 1983 BJ42 LX before the filter. The long part along the side and the short snorkle end up front. Do you have these? See pic.

 

[Firsttimer]

Hey I would just give Radd Cruisers a call! It would be quicker than waiting on this forum

Customization and Restoration Professionals - Services For Restoring 4x4s - RADD Cruisers, Duncan BC

Their number is on there.

 

[Eric Winkworth]

while i'm generally an oem fan I went with silicon hoses and alum pipe. It'll probably run half the cost

Intercooler Pipe Fabrication - Silicone Intake Systems Auto Parts

X2 the OEM ones really don't have anything up on the aluminum pipe silicone bends...

Also if you get black and paint the aluminum pipe it looks better under the hood to IMO...

The cost on the OEM part is utterly ridiculous for what it is IMO... Mine did last 25 years though before it cracked through...

 

[BTUMAN]

These silicone work, but look like they are pieced together aftermarket. The hose I have looks much more original.