ARB Drawer Owners...... I Have Some Questions for You. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Ok Im inspired. I will now begin the search for a driver side draw set up. Hopefully I can find some in stock, any recommendations ?
 
Ok Im inspired. I will now begin the search for a driver side draw set up. Hopefully I can find some in stock, any recommendations ?
As much as I hate to admit it... I got mine through 4wheel parts.

20200919_192558.jpg
 
I think Cruiser Outfitters is a stocking dealer.
 
If someone has handy, what’s the height of the cargo area at tallest point? And what about at the lowest point (ie the interior height of the rear cargo hatch opening itself). Trying to understand with 11” ARB drawers how tall of an object can fit into cargo areas. TIA
 
The cargo opening with the 1045 drawers installed is about 26-3/4" high by 51-1/2" wide. The tallest point inside the cargo area is about 30-1/2". Of course the sides curve down so you lose some height on the sides.
 
The cargo opening with the 1045 drawers installed is about 26-3/4" high by 51-1/2" wide. The tallest point inside the cargo area is about 30-1/2". Of course the sides curve down so you lose some height on the sides.
My 26-inch-when-seated pit bull Mara and I thank you, sir.
 
If someone has handy, what’s the height of the cargo area at tallest point? And what about at the lowest point (ie the interior height of the rear cargo hatch opening itself). Trying to understand with 11” ARB drawers how tall of an object can fit into cargo areas. TIA


They are approx same height as the middle row of seats when folded down.
 
Even though my 2021 gets off the RoRo tomorrow, I just finished reading through this whole thread. I guess I’m not getting the Trekboxx now.

Has anyone fitted the ARB roller drawer stainless steel table RDTAB1045? Does it work well? Any issues? Does it work on the RDRF1045 or just the RD?

And has anyone installed any cargo dividers to separate the fridge from gear? How’s that working out?
 
Last edited:
I have the stainless table and I could take it or leave it TBH. Comes in handy once in awhile but most of the time it just gets in the way. You have to pull out the table to access the drawer, so just adds another step to the process.

Only works on the RD not the RDRF.
 
I have the stainless table and I could take it or leave it TBH. Comes in handy once in awhile but most of the time it just gets in the way. You have to pull out the table to access the drawer, so just adds another step to the process.

Only works on the RD not the RDRF.
Thanks for the info. Looks like I have decisions to make.
 
I saw this today .. Engle Fridge in the Drawer.




engle-fridge-drawer.JPG
 
I'm having an issue with the roller floor not staying shut on my ARB set up. It almost looks like the clip near the front of the drawer is installed incorrectly. Might be tough to see in this picture. Can you tell? Thank you!


ARB Snap.jpg
 
ARB will send you a new part for that .. but it likely will take 5 or 6 months to get it. I had one of those plastic parts break and it was 5 or 6 months to get it,
 
I have two ARB drawers. Now thinking about removing the passenger side. I did two because I envisioned my wife sleeping in the truck with me. But as we have gotten older she is far less interested in this type of camping. So when I do I'll be on my own and therefore don't need the "full width" sleeping platform. Along with that, we expect to be visiting our kids/grandkids this year and it would be great to have seating for 6. I still have my 3rd row seats. So I am considering removing the passenger side drawer (if I can figure that out) and bringing back that seat. I also think this approach would make it a bit easier for me to sleep in as it would give me a bit more maneuverability inside. When camping I would probably just roll the passenger Sid second row forward and leave the passenger side 3rd row deployed.

Anyway, any new advice/comments about the 1-side drawer with 3rd row seat approach from those who have done it? Anyone know how to remove the passenger side drawer? Anyone interesting in buying a passenger side drawer and fit kit with a roll top?

FYI, if my wife ever does decide she wants to join me when camping in the back of the LC I think I'll just build a very simple, temporary platform that fills in the gaps resulting from the 3rd row seat and use it that way. For now I just want to remove (and hopefully sell) the passenger side drawer and fit kit.
 
I am going to be doing the same thing .. putting one of the 3rd row seats back in this spring. Another member did the same and posted some pic's and I like that kind of setup.
I also liked the groceries or stuff on the floor and not just using the rear window to hold them back in. The tail gate is way better for that.

I'm going to put the driver side seat back in because I have a bunch of electronics bolted to the passenger side drawer. In my situation it will be less work.

It looked like a nice setup.

rear-seat-11.jpeg


rear-seat-04.jpeg
 
I have two ARB drawers. Now thinking about removing the passenger side. I did two because I envisioned my wife sleeping in the truck with me. But as we have gotten older she is far less interested in this type of camping. So when I do I'll be on my own and therefore don't need the "full width" sleeping platform. Along with that, we expect to be visiting our kids/grandkids this year and it would be great to have seating for 6. I still have my 3rd row seats. So I am considering removing the passenger side drawer (if I can figure that out) and bringing back that seat. I also think this approach would make it a bit easier for me to sleep in as it would give me a bit more maneuverability inside. When camping I would probably just roll the passenger Sid second row forward and leave the passenger side 3rd row deployed.

Anyway, any new advice/comments about the 1-side drawer with 3rd row seat approach from those who have done it? Anyone know how to remove the passenger side drawer? Anyone interesting in buying a passenger side drawer and fit kit with a roll top?

FYI, if my wife ever does decide she wants to join me when camping in the back of the LC I think I'll just build a very simple, temporary platform that fills in the gaps resulting from the 3rd row seat and use it that way. For now I just want to remove (and hopefully sell) the passenger side drawer and fit kit.
If you decide to remove the driver's side instead let me know. I'm getting more tempted to do a half drawer setup, but I need to keep the passenger side 3rd row usable for my daughter.
 
If you decide to remove the driver's side instead let me know. I'm getting more tempted to do a half drawer setup, but I need to keep the passenger side 3rd row usable for my daughter.

Would love to help you out if I could but, like you, I want to have access to the 3rd row seat come from the passenger (curb) side. So I’ll need to sell the right side drawer and keep the left.
 
Would love to help you out if I could but, like you, I want to have access to the 3rd row seat come from the passenger (curb) side. So I’ll need to sell the right side drawer and keep the left.
I figured. Had to ask.

If anyone else sees this and wants to sell a driver's side drawer/wing/mounting setup, PM me. If not Land Shark Outfitters will be getting my business later this month
 

Users who are viewing this thread

Back
Top Bottom