Another headgasket blown

[BILT4ME]

Are you removing the rear heater and rear heater lines since you have the engine out?

 

[890man]

I actually like the rear heater. I use it when going to tahoe in the winter. I do plan on doing something about the hard lines though. Im just not sure what route to take. Ill have to inspect them real well first.

 

[890man]

Anyone concerned about this? Should i just brush it out and blast it with some cleaner. The truck sat for a bit and all the aluminum looks like this.

 

[BILT4ME]

Anyone concerned about this? Should i just brush it out and blast it with some cleaner. The truck sat for a bit and all the aluminum looks like this.
View attachment 2075135View attachment 2075134View attachment 2075133

As long as the flapper moves freely.

I sure hope you didn't remove the screws and tug on the wires.......

 

[890man]

It does move real well. And no, i didnt remove the screws. Thats a mistake i read about years ago but thanks for pointing that out. Is there anything else in there i can F up?

 

[PDoyle]

I don't think you can get the oem heater hard lines anymore.

 

[890man]

Thats ok, id either bend my own or just do soft line.