Another headgasket blown

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

890man

SILVER Star
Joined
Jul 7, 2005
Threads
90
Messages
867
Location
Thousand Oaks, Ca.
Well, its finally out and work has begun. It went at about 320K. Not too bad.
20190816_190118.webp
20190822_185634.webp
 
Last edited:
Number 5 went out on me. Its strange because i always seem to hear about #6 going.
20190822_185514.webp
20190822_185524.webp
 
The ring did contact the top of the piston!
20190822_191541.webp
 
The ring did contact the top of the piston!
Obviously the gasket fire ring contacting the top of the piston is not what Mr T had in mind. But even so, getting over 300 thousand miles out of that gasket really speaks to the quality Toyota puts into these trucks.
 
More progress. I dont plan on having the block done. Not gonna touch the crank, pistons etc. What should i do to make sure all passages are clear? How about the chain and guides? Replace?

The impact driver made quick work of the oil pump cover screws.

Gonna take my head over to Gary for a rebuild. Gonna get the intake, oil pan and valve cover tanked. Im thinking of powder coat for the valve cover while im at it.

Im sure ill have more questions but im reading up on mud a lot.
20190827_184843.webp
20190826_201941.webp
 
Engine bay cleanup, abs delete and steering box are in my future too. So easy to get to. Fun stuff!
 
ABS is gone! Steering box is out for a rebuild and a hydro steer porting! Head is off to Gary (Mudrak) for rebuild. Injectors out for cleaning. Time to clean the engine bay and all the other stuff i pulled off.
20190901_184732.webp
20190901_171538.webp
 
Bye bye lspv.
1567391823646415864523870971408.webp
 
I had a similar thread. You may be interested.
 
Thanks! Hadn't seen that one. I know what ill be reading tonight!
 
Just want to add a pic of my shop transportation thats used when too many adult beverages have been consumed. :beer::D
15673942990702848175398729861248.webp
 
Free on craigslist. Best shop investment ever!
 
Been removing all of my "rust prevention " under the hood. I had no idea the inner fenders were white!;) Still have more to do but im movimg on to something else.
20190902_172525.webp
 
Thinking of using the abs bracket to mount a heat exchanger and possibly a pump. That'll be near the end though.
15674743015627578582934994518928.webp
 
A two beverage fridge.
 
Cheap date...
 
Haha, yes. It does hold quite a few beers though. The fridge in the house has two shelves to prechill beer. I also keep the fridge in the truck well stocked.
 
Back
Top Bottom