Hi everyone.
Wonder if anyone out there has had these issues.
Just removed the front shocks from my LC 100 (AHC). replaced the bushings in the shocks they where totally gone. While I was there I notice that one of my height sensors had literally broken off, Probably when jacking the car up. The arm on the sensor had all but sized up so it simply broke the sensor off it´s base. So I sourced a second hand one that seemed fine and a quick check on it´s resistance seem to confirm that. Anyway I removed the shock, replaced the bushings replaced the front height sensors with ones from a younger LC 100 that had it´s AHC scrapped when it was converted to a Super Jeep on 47" tires. Put everything back in place, opened the bleed valves for each front globe and lowered the car. I added AHC fluid well above the high mark since a lot of oil was lost during the wok, closed the bleed valves and started the car. And noting.... The green light says it´s height is normal and pressing up or down button does noting, the up/down light just blinks. There are no error codes and no sound from the pump.
Has anyone here done this kind of work and perhaps have any ideas on what is bugging the system?
Any ideas appreciated
Wonder if anyone out there has had these issues.
Just removed the front shocks from my LC 100 (AHC). replaced the bushings in the shocks they where totally gone. While I was there I notice that one of my height sensors had literally broken off, Probably when jacking the car up. The arm on the sensor had all but sized up so it simply broke the sensor off it´s base. So I sourced a second hand one that seemed fine and a quick check on it´s resistance seem to confirm that. Anyway I removed the shock, replaced the bushings replaced the front height sensors with ones from a younger LC 100 that had it´s AHC scrapped when it was converted to a Super Jeep on 47" tires. Put everything back in place, opened the bleed valves for each front globe and lowered the car. I added AHC fluid well above the high mark since a lot of oil was lost during the wok, closed the bleed valves and started the car. And noting.... The green light says it´s height is normal and pressing up or down button does noting, the up/down light just blinks. There are no error codes and no sound from the pump.
Has anyone here done this kind of work and perhaps have any ideas on what is bugging the system?
Any ideas appreciated
Last edited: