ahc front hose bolts? (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 1, 2025
Threads
1
Messages
2
Location
united Kingdom
Hi all new member and new owner of a beautiful 2006 100 series.
So on the way back from a recent trip the front passenger side (UK car so left side) hose that connects the top of the shock to the accumulator burst where the hard-line connects to the soft. Front end dumped down to the bump stops. Luckily I was pretty much outside my house so not to much of a drama.

I've now got the replacement hose which foolishly I expected to come with the required hardware which it didn't.

I cannot for the life of me find either the official parts or the spec for the bolts and o ring / backup ring so I can buy replacements.

Any help would be much appreciated.
 
The new line should've come with the O ring in it, where did you buy it from. As for the bolts, are you referring to the two 12mm bolts holding the end of it to the strut mount? Take some pics so we can get on the same page to help. Also, good luck snaking that line in, it took me a lot of time and cursing to replace it, and i have a lift too.
 
Bought it from Tuning Developments. Seems decent enough and it might have the o ring in it if it's pre pushed into the end of the hose, also it's packed with grease?


Yes the 2 12mm bolts are a rusty POS so would like to replace. Just don't know what thread/ pitch and length they are.

One thread I read said they're m8?

I know it's going to be a pitta but you gotta do what you gotta do right? I had it laying next to the old one in situ and it looked doable. Also read threads of people achieving it so I don't mind putting in the grind to get it figured out.

IMG-20250801-WA0005.webp
 
Those two bolts you can just take from anywhere on the body that uses a 12mm bolt for now, take one from the running board.
 

Users who are viewing this thread

Back
Top Bottom