My radiator fan spacer (0.187” inch thick aluminum) is not enough to clear my supercharger tensioner pulley. Is it safe to use lock washers as additional spacers? I’m thinking of maybe 2 spacers per stud. Also maybe I can find a tensioner bolt with shorter head for added clearance?
Here are the photos
I also need suggestion separating the throttle body adapter to the supercharger body. I removed the two bolts but its held by the FIPG very well. I need to send the supercharger to Jon Bond. I tried tapping with mallet with no success. Will heat gun work?
Here are the photos
I also need suggestion separating the throttle body adapter to the supercharger body. I removed the two bolts but its held by the FIPG very well. I need to send the supercharger to Jon Bond. I tried tapping with mallet with no success. Will heat gun work?
Last edited: