Hi, I've been a lurker on this forum for a few months now and thought it was about time to join in. I have an 06 GX that I bought last November in Phoenix with 65K miles on it (thanks to the previous owner, who ever you may be, for taking such good care of it!).
Now has around 85K on it...lots of trips up to CO. Maintenance was up to date when I bought it but have since done a complete transmission fluid swap, front and rear diff fluid and transfer case fluid (thanks to everyone's posts these all were fairly easy). I've done the running board delete with the cutting mod to cover up the spot by the front wheels, unhooked the CD player and added in an audivox box to add an iphone hook up and put on a ROLA roof rack. Finally I just finished building a cargo box for the back (if there's any interest I can post the route I took). Next up will a timing belt over Christmas...wish me luck.
Quick question: Our wheels are 17x7.5 with a 25 mm offset...are most people going with a 17x8 for aftermarket wheels with a positive offset still? I'm finding quite a few wheels I like but most have a 0mm offset so I'm concerned about a weird look if the wheels stick out an inch and half further on each side. Any insight into wheel specs you guys are using would be great, thanks!
Now has around 85K on it...lots of trips up to CO. Maintenance was up to date when I bought it but have since done a complete transmission fluid swap, front and rear diff fluid and transfer case fluid (thanks to everyone's posts these all were fairly easy). I've done the running board delete with the cutting mod to cover up the spot by the front wheels, unhooked the CD player and added in an audivox box to add an iphone hook up and put on a ROLA roof rack. Finally I just finished building a cargo box for the back (if there's any interest I can post the route I took). Next up will a timing belt over Christmas...wish me luck.
Quick question: Our wheels are 17x7.5 with a 25 mm offset...are most people going with a 17x8 for aftermarket wheels with a positive offset still? I'm finding quite a few wheels I like but most have a 0mm offset so I'm concerned about a weird look if the wheels stick out an inch and half further on each side. Any insight into wheel specs you guys are using would be great, thanks!