Looking to replace the shift indicator plate for my 99 LC. I've found 2 part numbers and I'm wondering if one or both will work. Thanks!
35921-60180
35921-60210
35921-60180
35921-60210
'99 LC shift indicator plate part number (1 Viewer)
- Thread starter Atascruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Assuming the LC one is the same as a 99 LX, I ordered the -60210. Pictures of the replacement part and process here: New with 99 LX - https://forum.ih8mud.com/threads/new-with-99-lx.1191866/post-13349107
Last edited:
35921-60180 worked for my '98. It's $84.17 at PartSouq, ~$140 domestically.
35921-60210 does not show up as a valid P/N in the US, although it does show up at PartSouq for $67.01. According to @dbfw it looks like a direct fit for less $$.
35921-60210 does not show up as a valid P/N in the US, although it does show up at PartSouq for $67.01. According to @dbfw it looks like a direct fit for less $$.
Last edited:
- Thread starter
- #4
Perfect! Exactly what I needed to know. Looks like I'm going with the cheaper of the 2. Thanks!
Good to know @Ayune I just went straight to PartSouq to browse the diagrams and order, didn't even consider ordering from a US source.
@Atascruiser , when you go to do the swap, don't cut the OD wires. Just follow them back to their connector and depin them. They will fish out with the shift knob. Getting them threaded back through is a bit tedious, but not too bad at all.
Edit: Looking at the pictures of both PNs, you can see in my side by side pictures as well that the -60210 has a slightly tighter spacing between the D, 2, L positions. It looks like the -60180 might be the exact replacement. However, the indicator light still aligns properly on my -60210 going through all the gears, so I'm not sure that it really makes any meaningful difference.
@Atascruiser , when you go to do the swap, don't cut the OD wires. Just follow them back to their connector and depin them. They will fish out with the shift knob. Getting them threaded back through is a bit tedious, but not too bad at all.
Edit: Looking at the pictures of both PNs, you can see in my side by side pictures as well that the -60210 has a slightly tighter spacing between the D, 2, L positions. It looks like the -60180 might be the exact replacement. However, the indicator light still aligns properly on my -60210 going through all the gears, so I'm not sure that it really makes any meaningful difference.
Last edited:
I just received the 35921-60180 shift plate. Looks great.
Here's my dilemma, I think I need a bulb for the console shift position light. It does not work. Does anyone know the bulb part number?
Note the shift position lights on my instrument cluster all work.
Here's my dilemma, I think I need a bulb for the console shift position light. It does not work. Does anyone know the bulb part number?
Note the shift position lights on my instrument cluster all work.
It’s a combination of these two parts. You can probably re-use the green cap unless it’s stuck on the old bulb.
From this diagram:
partsouq.com
From this diagram:
SHIFT LEVER & RETAINER | Toyota LAND CRUISER 100 UZJ100L-GNPEKA UZJ100 | Parts Catalogs | PartSouq
If you are looking for SHIFT LEVER & RETAINER Parts for Toyota LAND CRUISER 100 UZJ100L-GNPEKA UZJ100 then we advise you to pay attention to the range of our spare parts catalog for Toyota!
Last edited:
Thank you!It’s a combination of these two parts:
View attachment 2575886View attachment 2575887
From this diagram:
SHIFT LEVER & RETAINER | Toyota LAND CRUISER 100 UZJ100L-GNPEKA UZJ100 | Parts Catalogs | PartSouq
If you are looking for SHIFT LEVER & RETAINER Parts for Toyota LAND CRUISER 100 UZJ100L-GNPEKA UZJ100 then we advise you to pay attention to the range of our spare parts catalog for Toyota!
JakeTheSnakeNH
GOLD Star
Swapped mine out today, and aside from cleaning up gunky console nooks and crannies, the hardest part was fishing the o/d wires back out the bottom of the shifter column. Thanks for all the great info about the part and the procedure!
So much better.
So much better.
Green Number 74 LED wedge should work there too.
okoverland
SILVER Star
okoverland
SILVER Star
I think I figured this out - looks like that part is for a 4Runner.
Looks like the best current option is part # 35921-60210 at partsouq
Yea, that link was wrong. Removed.
Last edited:
Hi all, was just wondering if there's an Australian version of partsouq.com? I'd like to replace my shifter knob and the cover in my 99 lx as the leather has deteriorated.
See if this part is available local to you: How to: Non-Leather Shift Knob replacement - '98-'02 - https://forum.ih8mud.com/threads/how-to-non-leather-shift-knob-replacement-98-02.1121609/
I haven't been able to find one in stock either, but a great alternative is the ZR tactical billet shift indicator plate!
I’m also on the lookout for one of these but can’t find one anywhere.
This billet part looks great but I’d still prefer the OEM look.
Has anyone had any luck with a refurb?
This billet part looks great but I’d still prefer the OEM look.
Has anyone had any luck with a refurb?
