awesome. im glad it works and that i could help.
'88 4Runner SAS (1 Viewer)
- Thread starter John Stw
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Great that you could help him.....NOW FIND ME ONE! HAHAHA!
By the way it`s not a timing chain in that moter its a belt.
Once again,man that is really going to be a sweet set up. I guess the snow ball effect is going to happen to the driveshafts and all that suff again ?
hahaha if it were just that easy, ill keep my eyes and ears open for awesome deals like that. i can only do so much lol
- Thread starter
- #186
So John when are you planning to do this big job?
- Thread starter
- #188
Not sure still collecting parts, but I will let you know.
How are you running your exhaust?
out the exhaust pipe would suspect
sorry! couldn`t resist
believe cross over to left side.
I like straight out da hood
like our motto all good n a wood
- Thread starter
- #191
Still working on that, wanted a crossover pipe along the engine to the passenger side, but no one wanted to take on the project. So it looks like I will run derby headers out the hood. JK
Thinking about some flanges that allows me to drop the crossover section under the trans bell housing.
Thinking about some flanges that allows me to drop the crossover section under the trans bell housing.
Can you come down and back and Y together over the drive shaft? You should have plenty of clearance and it won't be as exposed there as under the bell housing....or just run duals if you are going back that far anyway.
- Thread starter
- #193
Found a good build thread for a the crossover pipe just need some one that can weld it up for me. Please let me know of anyone that can help.
I think I can cut it out just don't have a welder.
Build your own 3.4 crossover pipe - YotaTech Forums
I think I can cut it out just don't have a welder.
Build your own 3.4 crossover pipe - YotaTech Forums
Albert were you at.
- Thread starter
- #197
it sure is gona get WARM back there!
welding ain`t no prob itwillbe the fittin
The fitting is important as well have to leave room for the trans and clear the truck frame.
When are you planning on doing this project. I think I will be buying a welder soon.
- Thread starter
- #199
Found how I will run without the 2nd O2 Sensor just have to figure out all this wiring stuff.
O2 sensor bypass
O2 sensor bypass
Shouldn't it show polarity for the cap?