fzjmemphis
Wanderer
Im all in for the next batch! Interested in a DS with the high lift kit.
Last edited:
80 Series Factory Bumper Swing Out DIY Kits (1 Viewer)
- Thread starter SUMMIT CRUISERS Jr
- Start date
-
- Tags
- fzj80 swing out tire carrier
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
SUMMIT CRUISERS Jr
SILVER Star
- Thread starter
- #443
I haven’t had a chance. Hoping to start a batch around the end of the year.
SUMMIT CRUISERS Jr
SILVER Star
- Thread starter
- #445
I have actually installed one on a diesel JDM cruiser and it went great. The only difference and slight hindrance I experienced was with the larger exhaust tip making it a little more difficult to get tools into the correct position in a couple instances.
Aweome, can't wait to get it done.
Krondor
SILVER Star
Same herrr
IF there's a list, please put me on it! I I started reading then got cross eyed on the 22 previous pages. How much for the option to have dual swingouts?
Great work! I’d Ike to be added to the list.
SUMMIT CRUISERS Jr
SILVER Star
- Thread starter
- #452
Hey guys I’ve got several updates for ya!
First off, I’ll be wrapping up my semester December 13th and then starting up a batch. Since I was unable to produce any this past summer, I know there is some unmet demand there as well as unmet demand from the previous batch.
I am considering opening for orders beforehand as I have a light spring semester. Normally, I have to have them done before the spring semester starts, but as this is my final semester, I will have time extending into that semester.
This has me considering building an even larger batch than normally. The nonrefundable deposit would increase in price and the wait time to get a kit would extend past January, but likely no later than March.
I have not kept lists, but I feel like this would allow orders to trickle in over maybe say a week or until reaching a certain capacity but it would not necessarily be as fixed as the capacity of what I’ve built and have on hand. The more kits, the longer the time until completetion so there are some trade offs.
I know a lot of you guys have wanted one for awhile now, and I am trying to come up with a way that would satisfy most as this will likely be my last batch for awhile as I will be moving out of state this summer and losing access to the shop and tools I have used up until this point.
Let me know what you guys think of this and if you have any other suggestions/ideas. I’m open to them and don’t worry...I’m not opening for orders for yet. A decision will be made regarding this process by December 14th.
First off, I’ll be wrapping up my semester December 13th and then starting up a batch. Since I was unable to produce any this past summer, I know there is some unmet demand there as well as unmet demand from the previous batch.
I am considering opening for orders beforehand as I have a light spring semester. Normally, I have to have them done before the spring semester starts, but as this is my final semester, I will have time extending into that semester.
This has me considering building an even larger batch than normally. The nonrefundable deposit would increase in price and the wait time to get a kit would extend past January, but likely no later than March.
I have not kept lists, but I feel like this would allow orders to trickle in over maybe say a week or until reaching a certain capacity but it would not necessarily be as fixed as the capacity of what I’ve built and have on hand. The more kits, the longer the time until completetion so there are some trade offs.
I know a lot of you guys have wanted one for awhile now, and I am trying to come up with a way that would satisfy most as this will likely be my last batch for awhile as I will be moving out of state this summer and losing access to the shop and tools I have used up until this point.
Let me know what you guys think of this and if you have any other suggestions/ideas. I’m open to them and don’t worry...I’m not opening for orders for yet. A decision will be made regarding this process by December 14th.
I’m fine paying a slightly larger deposit and waiting a lil longer for an assembled unit. I plan to employ someone here in AZ to install once I have it. I don’t have the tools or know-how to install myself, unfortunately. If you’re doing a list, I hope to be put on it. I love the tire swing-out while still keeping the stock rear bumper.
Is there an option for dual swing outs?
please add me to whatever list may exist. I’m ready to submit a deposit.
Thanks in advance!
I will put a deposit down as soon as you give the go ahead. Thanks
Sign me up. I want one too!
Been lurking this thread waiting for updates. More units and a bigger deposit are no problem neither is time. As soon as you open up to orders I can give my deposit. Thanks!
