For Sale 7X series new body panels

[MrMoMo]

Yes however i can not get a magnet to stick to anything above the rail, I pulled a bunch of foam out form the inside, not bondo but expansion foam .. As I can not get replacement rail, I will be stripping it down and repairing..

Ahh, roger that - looks can be deceiving. Get yourself a shrinker stretcher from Eastwood and start shaping metal! I've made many an oddball piece for the back half of the 70... (Check link in sig "saving the silver 70")

 

[joekatana]

Bump,fresh inventory to arrive in a couple of weeks

I can do Mudship for these parts to either the 70 series meet and greet in September or the Crawl in October

 

[mmcinnis]

Bump,fresh inventory to arrive in a couple of weeks

I can do Mudship for these parts to either the 70 series meet and greet in September or the Crawl in October

Hey, im on the fence, i need to start working on the troopy. May be a good time to grab some body parts from ya. Lets keep in touch. Hope all is well. Mike

 

[joekatana]

A fresh batch is just in,come and get them while they are available

 

[Trinidad]

PM sent...

 

[joekatana]

Bumping up this tread as a lot of folks have trouble finding it

 

[joekatana]

New inventory coming in later this week ,just in time to start your winter project !

 

[Tennessee Jed]

Will order rocker panels after I get Christmas taken care of.

Can you get the right side panel over the fender that a snorkel pierces? I want a snorkel but I don't want to cut my current sheet metal. I found a source in Canada but your prices are outstanding.

 

[joekatana]

Will order rocker panels after I get Christmas taken care of.

Can you get the right side panel over the fender that a snorkel pierces? I want a snorkel but I don't want to cut my current sheet metal. I found a source in Canada but your prices are outstanding.

Not new but I have used upper fenders available ,these are Euro spec and do have a small hole in it for the turn signal which will be covered by the snorkel anyways.

Joe

 

[Hondu]

Interested in a windshield frame. Can pickup. Do you have doors?

 

[joekatana]

Interested in a windshield frame. Can pickup. Do you have doors?

I have 1 windshield frame left at this moment and I might have some doors for the hardtop models but none for the frp/soft top

 

[bj70_guy]

Joe, do you have any windshield frames in stock?
Weighing my options...

 

[joekatana]

Joe, do you have any windshield frames in stock?
Weighing my options...

Not at this moment but I am about to order a fresh batch that should be here early summer.

 

[bj70_guy]

Ok, thanks.

 

[Hitoy4x4]

Hello do you still have the front fenders in stock?
Can you also get the signal lights ?

 

[DoDevil]

Hi. Im new here. I need some replacement panel for a LJ-73. Quarters panel and windshield frame. How i can contact you?

I was working in this one (red/green) and already finish without panels but the new proyect (black) is worse.

Look like i will have some action with this models with a importer here in florida.

 

[forrest5000]

Have any soft top doors?

 

[Henryhansen]

I am trying to get more new parts for the 70 series in inventory and this is a small selection of what I have to offer now and more to arrive next month.

All steel aftermarket panels are from Europe made by Klokerholm ,I have used them myself on various occasions and am happy with them,the rear quarter panels are aa direct fit for the swb 70 series but I use them mostly to replace wheel arches on 73 and 75 series,they are very close to OEM fit and I even feel that they use slightly thicker gauge then oem making them less prone to warp when welding.

I have no pictures yet of the fiberglass parts I am bringing from Germany but I have used those in the past and this is what all my friends in Europe use to replace the crusty OEM 7X series windshield frames, I have only 5 of them on the way and 2 are spoken for already ,they are priced at 450$ plus the ride.

Front 7X fenders 300$ a piece

View attachment 1367919 View attachment 1367920 View attachment 1367921 View attachment 1367922

Do you still have the fenders? I am interested in both the left and right rear fenders.

 

[joekatana]

Do you still have the fenders? I am interested in both the left and right rear fenders.

All sold out for now but new inventory coming in mid June.

 

[joekatana]

Have any soft top doors?

Just look at my other for sale treads here, I might have a line on a few nice sets also but those are gonna be expensive.