- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #241
Cheers
Builds 79-series Mongrel build (2 Viewers)
- Thread starter SNLC
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Cheers
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #242
Scheel-Mann slider and modified Planted single cab 79-series base.
Cheers
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #243
Our first tank of fuel, used 23.5gal and did 405 miles. 17.25mpg.
We are also not driving it for mpg rather for break in procedures.
Cheers
We are also not driving it for mpg rather for break in procedures.
Cheers
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #244
80 series tow hitch.
Backup camera
We had the handles for the carriers cerakoted with a certain cerakote that is very slippery. Seems to be working well. I think we will just change the castle nut pins to cotter pins and call it done.
Cheers
Backup camera
We had the handles for the carriers cerakoted with a certain cerakote that is very slippery. Seems to be working well. I think we will just change the castle nut pins to cotter pins and call it done.
Cheers
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #245
Hood is getting painted next week so we went ahead and sprayed some hood anti-rattle foam. It’s a 3M automotive product, the grey stuff. The tan is OEM.
Yes we trimmed it back after spraying and curing.
Cheers
Yes we trimmed it back after spraying and curing.
Cheers
Badass work man
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #248
Back from the paint shop!
Cheers
Cheers
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #249
Cheers
- Joined
- Sep 9, 2004
- Threads
- 200
- Messages
- 12,508
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #250
So the Decked is for a 05-23’ Tacoma with the 5ft bed. It’s the closest we could find to a plug and play system. It did require some plastic carving between the wheel wells at the front of the bed to fit it.
Here is how we have setup the mounting, no holes drilled in the bed to do this.
The fridge is getting mounted to a drop down slide. The fridge is a National Luna 70L fridge/freezer combo. It was decided to not do anything with the side trim on the top of the Decked too. Such as get it to go all the way to the sides of the Cruiser bed. So we will be leaving the gaps on both sides of the Decked which in my opinion works well for stuffing gear along the sides such as muddy boots.
The owner is flying in September 12th, we will go over the Cruiser for a day and after that he is taking it (and his wife) on a fishing trip in Montana for a week! The Cruiser won’t be 100% done by then (our Smartcap is hitting USA port August 26th so won’t be installed by mid September) but it will be done enough for a week long fishing trip!
Cheers
Here is how we have setup the mounting, no holes drilled in the bed to do this.
The fridge is getting mounted to a drop down slide. The fridge is a National Luna 70L fridge/freezer combo. It was decided to not do anything with the side trim on the top of the Decked too. Such as get it to go all the way to the sides of the Cruiser bed. So we will be leaving the gaps on both sides of the Decked which in my opinion works well for stuffing gear along the sides such as muddy boots.
The owner is flying in September 12th, we will go over the Cruiser for a day and after that he is taking it (and his wife) on a fishing trip in Montana for a week! The Cruiser won’t be 100% done by then (our Smartcap is hitting USA port August 26th so won’t be installed by mid September) but it will be done enough for a week long fishing trip!
Cheers
Last edited:
