60 series....Tech and Classifieds (1 Viewer)
- Thread starter Bomar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hey guys and gals, I am seriously looking for a 60 (or 62). If there is a nice one out there without any rust (or minimal), let me know.
- Mark
- Mark
There was a link to nice looking blue one in this thread recently
60's.....either red hot or you can't give away. Crazy.
60's the new 100's...
Bomar - if you ever want to get rid of yours...you know who to call.
You can talk him out of it Mark and you would be wise to do so. He needs to get Tesa a new Sequoia anyway
Cruising timber in my tractor.
A/C not barking at me today. Who knows.
I'll admit I have the 60 fever. Been slowly getting my rusty 87 running well.
Poser shot
Dead starter at the gym this am. Good project for a rainy day
Dang. that sucks. You appear to be a half-mile from my house. Let me know if you need any help.
My buddy Sean that owns Calistoga wine borrowed a chain and gave me a tug.
Just got into shop. Shut off. No start.
Click.
OEM and AutoZone the same price but gotta get Beno to ship and I have to pay core. I think I'll ride to canton and go with the AutoBone so I can get it out of shop this weekend
Also, I'm about to swap sides on rear spring packs. I'm 99% sure I installed them backwards in 1999 and that is why I have a 1 to 1.5" lean to the right. (Passenger)
It's a bitch but I got the time this weekend
Just got into shop. Shut off. No start.
Click.
OEM and AutoZone the same price but gotta get Beno to ship and I have to pay core. I think I'll ride to canton and go with the AutoBone so I can get it out of shop this weekend
Also, I'm about to swap sides on rear spring packs. I'm 99% sure I installed them backwards in 1999 and that is why I have a 1 to 1.5" lean to the right. (Passenger)
It's a bitch but I got the time this weekend
If the starter is nice and you weren't in a hurry, you can just buy the contacts and plunger (from Beno). Those are the wear items. Doesn't take more than an extra five minutes over just replacing the whole deal.
I had the same spring problem. After alot of removing/measuring/swapping sides, etc., the end result was that ARB/OME sent me a second "A" spring. I have the same spring on both sides.
I had the same spring problem. After alot of removing/measuring/swapping sides, etc., the end result was that ARB/OME sent me a second "A" spring. I have the same spring on both sides.
One "feature" that I will miss from the old drivetrain is being able to bump start it in the event of a dead starter or battery. That has saved my ass on more than one occasion.
Sigh. Was there ever an easier starter to remove?
Damn. The "+" spring is already on the low side. I either put a spacer on top of the low side pack (like the CCOT LEAN kit) or pull a leaf on the high side if I want it level
Is one an "A", and one a "B"?
