60 Series Australian sliding cargo window group buy round 2

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 24, 2016
Threads
95
Messages
3,579
Location
Oregon
I did a group buy a few months back for cargo sliding windows for our 60 series and they all sold very quickly. There was a few people interested in sets that werent able to get them. I am doing another group buy for 5 sets in total now.

The group buy is full. I was only able to find 5 sets of windows and they are all spoken for. If anything changes, Ill reach out to those who contacted me. Thanks all!

Sliding window Group buy members:

- @Idaho Savage
- Local guy who isnt on Ih8mud
- @mcflan
- @brutus785
- @cruiseroutfit

1/4 vent windows Group buy members:
- @CruiserTrash
- @dbbowen aka me


The sliding windows are pull offs from trucks in australia and will need to be cleaned up and rebuilt. Ill include a few photos below of mine.

I am still getting final pricing, but this is what its going to look like

- pair of OEM sliding windows and the frames -$220-250 USD.
- set of complete rubber rebuild kits from Rubber Seals Australia (will be all of the rubber to rebuild the kits) - $231.00 USD
- Shipping split 5 ways from Australia to Oregon
-Shipping from Oregon to wherever you live. You are welcome to come pick them up if you are close to Oregon.

I'm not really making any money at all off of these windows. I am just doing this because im ordering some 1/4 windows (see below post) and im lumping all of the shipping together so i can save some bucks on the shipping.

Please keep in mind, these are used windows and window frames, not brand new. They will need the rubbers replaced, some rust sand blasted and either painted or powder coated. My set of windows had some small rust pinholes but i was able to sandblast and fix them and they are in use today.

I can rebuild these for you, but it will be costly. They are very easy to rebuild yourself. There is a great thread here on how to rebuild them and different parts people have used in the past to do it. I used the complete kit from Rubber Seals Australia on mine and they have been perfect.


Some Photos from last time :

How they arrived:
a1c16187-ec1a-4d26-8736-c985a0076353-jpg.3476545


before sand blast and powder coat
c6f9ceb7-e234-4c9b-8df0-9f30a1dd81a2-jpg.3476551


After powder coat
433d94b1-ce43-4a11-853a-be081fc162bd-jpg.3476576


Tinted glass and installed.
oO60cIEl.jpg

NJ9N7Wtl.jpg

g5wWYz5l.jpg
 
Last edited:
I also have 2 sets of 1/4 window glass coming for the front door. I am buying one of these sets for myself so there will be one set available for purchase. The 1/4 window glass "Kit" will come with:

- Small triangle glass
- 1/4 glass frame
- Smaller front door window
-smaller window regulator
-new window run strip from Rubber seals australia.

dont have a final price on these just yet, but should have it here in the next day or two

This will give you the "smokers window" on your front doors. See below image. This truck also has the rear sliding cargo windows as well.

_MG_1962.jpg

_MG_1974.jpg


_MG_1817.jpg
 
Last edited:
I’m in for the vent windows!

Always wanted a pair. Make my dreams come true please.
 
I also have 2 sets of 1/4 window glass coming for the front door. I am buying one of these sets for myself so there will be one set available for purchase. The 1/4 window glass "Kit" will come with:

- Small triangle glass
- 1/4 glass frame
- Smaller front door window
-smaller window regulator
-new window run strip from Rubber seals australia.

dont have a final price on these just yet, but should have it here in the next day or two

This will give you the "smokers window" on your front doors. See below image. This truck also has the rear sliding cargo windows as well.
Unfortunately I'm not in a position to buy a set of windows with this round, but I'm highly interested in a set of sliders and vent windows in the future.

Do the vent windows just "drop in" to stock 60 doors? What's involved with installing them?
 
Unfortunately I'm not in a position to buy a set of windows with this round, but I'm highly interested in a set of sliders and vent windows in the future.

Do the vent windows just "drop in" to stock 60 doors? What's involved with installing them?
They should install for the most part drop in, there might be some modifying the door panel trim but otherwise they are bolt in. I added these to a firstgen 4runner in the past and it was pretty easy. Finding the parts is the hard part
 
I am in for vent windows but live in Texas.
Are you saying the overall cost is 250 bucks for a pair of windows, new rubber, and shipped to my house? If so then I am in. Please send me a message.
 
I’m in for the vent windows!

Always wanted a pair. Make my dreams come true please.
Thank you for getting these so I don’t have to!

For anyone considering the sliding cargos, I got a set in the first group buy and am really happy with them. Had a small dent in one frame and I just left it. My set were a little faded but not rusty and really could’ve been used as is. I had them blasted and powdercoated, new seal kit but reused all the plastic latch bits (with new rubber between latch and glass). Just wanted to show another set. Very happy I got these, nice to open the rears a few inches and get airflow when driving. Can’t find my before pics. I also had them tinted before putting them together. (Can see the dent right below the roof bar)

IMG_6952.jpeg
 
Last edited:
Thank you for getting these so I don’t have to!

For anyone considering the sliding cargos, I got a set in the first group buy and am really happy with them. Had a small dent in one frame and I just left it. My set were a little faded but not rusty and really could’ve been used as is. I had them blasted and powdercoated, new seal kit but reused all the plastic latch bits (with new rubber between latch and glass). Just wanted to show another set. Very happy I got these, nice to open the rears a few inches and get airflow when driving. Can’t find my before pics. I also had them tinted before putting them together. (Can see the dent right below the roof bar)

View attachment 3716933
Thanks for the testimonial! Also thanks again for letting me borrow your glass hahah
 
How w about a big round of applause for @dbbowen for the effort!!!!
 
Nice! Add me to the list if this ever happens again!
 
Not sure why you would, but if you do this again...I'd be in for a set.

Cheers for making the effort!
 

Users who are viewing this thread

Back
Top Bottom